Zhong / Saka / Kim PRICM-5

Erscheinungsjahr 2005
ISBN: 978-3-03813-001-7
Verlag: Trans Tech Publications
Format: PDF
Kopierschutz: 0 - No protection

E-Book, Englisch, 4560 Seiten

This indispensable work is the fifth in a series of international conferences devoted to advanced materials and processing. The conferences, which are held every three years, are jointly sponsored by the Chinese Society for Metals (CSM), the Japan Institute of Metals (JIM), the Korean Institute of Metals and Materials (KIM), and the Minerals, Metals and Materials Society (TMS), and organized by them in rotation. The purpose of this international conference, PRICM, is to provide a forum for the exchange of technical and scientific information, which is always of great benefit to researchers, manufacuturers and end-users.

Autoren/Hrsg.

Zhong, Xiang Yu

Saka, Hiroyasu

Kim, T.H.

Holm, E.A.

Han, Ya Fang

Xie, Xi Shan

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

Preface
Annealing Textures of Thin Films and Copper Interconnects
Impact of a Combined Use of Focused Ion Beam Technique and Transmission Electron Microscopy on Materials Characterization
Novel Properties of Nanostructured Metals
A Unified Technology Combining Plastic Forming and Heat Treatment of Steels
Structural Refinement of Interstitial Free (IF) Steel by Deformation and Phase Transformation
Grain Refinement and Mechanical Properties of a Metastable Austenitic Fe-Cr-Ni-Mn Alloy
Characteristics of Deformation-Enhanced Transformation in Plain Low Carbon Steel
Corrosion Resistance of Si and Al-Bearing Ultrafine Grained Weathering Steel
Evaluation of Corrosivity in Atmospheric Environment by ACM (Atmospheric Corrosion Monitor) Type Corrosion Sensor
Continuous Cooling Transformation Temperatures and Microstructures of Niobium Bearing Microalloyed Steels
Control of Martensitic Morphology in Thermal-Mechanical Processing of Ferrous Alloys
Characterization of Kinetics of Deformation-Enhanced Transformation in a Low Carbon Steel
Study on Microstructures and Mechanical Properties of B510L Steel by TMCP
Microstructural Evolution and Mechanical Properties of Modified 9%Cr-1%Mo Steel upon Isothermal Heat-Treatment
Formation and Control of the Acicular Ferrite in Low Carbon Microalloying Steel
Effects of the Finish Rolling Temperature on Mechanical Properties and Microstructure Evolution of Line Pipe Steel
Microstructures and Properties of a Bainite and Martensite Dual-Phase Cast Steel Fabricated by Combination of Alloying and Controlled Cooling Heat Treatment
Strengthening and Toughening Mechanisms of the Microalloying Non-Quenching and Tempering Steel
TEM Observation on Nano-Precipitation of Plain Low Carbon Steel by CSP
Strain-Induced Precipitation of Nb(CN) during Deformation of Undercooled Austenite in Nb-Microalloyed HSLA Steels
Distribution of Mo at Grain Boundary of 1300MPa CrMo Steel
The Mechanism of Intragranular Ferrite Nucleation on Inclusion in Steel
Subsurface Microstructure Evolution of Hadfield Steel under High Impact Energy
Evolution of Microstructures in a Low Carbon Bainitic Steel during Reheating
Dislocation-Precipitate Interaction and Its Effect on Thermostability of Bainite in a Nb-Bearing Steel
The Aging Behavior for Low Carbon Bainitic Steel Bearing Cu-Nb
Surface Nanocrystallization of Low Carbon Steel Induced by Circulation Rolling Plastic Deformation
Microstructures and Microhardness of SNCed Medium Carbon Low Alloy Steels
Ultra-Fine Grain Size by Dynamic Recrystallization in Strip Rolling of Nb Microalloyed Steel
Continuous Dynamic Recrystallization of AISI 430 Ferritic Stainless Steel by Hot Torsion Deformation
Dynamic Recrystallization of Ferrite in a Low Carbon Nb-Microalloyed Steel
Study on Recrystallization Behavior of High Strength Automobile Steel Sheets Produced by CSP
Models for Static and Metadynamic Recrystallisation of Interstitial Free Steels
The Effect of Deformation Temperature on the Recrystallization Behavior of AISI 304 Stainless Steel
Texture Developments during Ferrite Refinement through Deformation-Enhanced Ferrite Transformation and Dynamic Recrystallization in Low Carbon Steel
Prediction of Flow Stress and Microstructural Evolution during Hot Forging of Three Microalloyed Medium Carbon Steels
Effect of Initial Structure on Recrystallized Austenite Grain Size of Fe-32%Ni Alloy
Effect of Austempering Process on the Properties of TRIP-Steel
Influences of Severe Deformation and Alloy Modification on Secondary Hardening and Fracture Behavior
Surface Age-Hardened High Speed Steel with High Co Content Formed on Undecarburized Carbon Steel
Effect of Aging Treatment on High Temperature Strength of Nb Added Ferritic Stainless Steels
Effect of Ti on Formability of IF Steels
Wear Behavior of an Austempered Ductile Iron Containing Mo-Ni-Cu
Effect of Heat Treatment on the Thermal Expansion Coefficient of Austempered Ductile Iron
The Effect of Si on the Toughness of High Strength Mn-Si-Cr Series Bainitic Steels
The Effects of RE-Mg on Thermal Fatigue Resistance of Cast High Speed Steel (HSS) Rolls
Effect of Thickness of Water Film on Atmospheric Corrosion Behavior of Carbon Steel
Localized Corrosion Behavior of High Nitrogen Steel
A New Method to Determine the Activation Energy for Hydrogen Desorption from Steels
Origin of the Hydrogen Absorbed by Incoherent TiC Particles in Iron
Development of Corrosion and Wear Resistant Coatings by an Improved HVOF Spraying Process
Influence of Trace Boron and Cooling Rate on the Thermal Embrittlement of 2.25Cr-1Mo Steel
Fatigue Property of High-Strength Carbon Steel Deformed by Repetitive Side Extrusion Process
Study on Thermal Fatigue Behavior of Boride Layer of H13 Steel
Interactive Mechanisms of Sulfide Inclusions and Environmental Factors in Low Cycle Fatigue Process of Pressure Vessel Steels in High Temperature Water
Evaluation of Thermal Degradation of 2.25Cr-1Mo Steel by High Frequency Ultrasonic Attenuation Measurement
Damping Capacity of the Fe-Cr-Al Based Alloys
An Investigation of a Nitrogen Enhanced Steel Processed by Explosive Powder Compaction
Development of the SAW Wire for High Strength TMCP Steel
Manufacturing and Oxidation Property of Steel and Ti Metal Fibers
Determination of Optimum Parameters Effect on Kerf Width of 316L Stainless Steel Tube in Nd:YAG Laser Cutting
The Electromagnetic Confinement and Shaping Process of Liquid Metal
Modeling and Numerical Calculation of Heat Transfer during Magnetic Field Quenching
Correlation of Yield Ratio with Materials Constants of Constitutive Equation
Experimental and Thermodynamic Modeling of the MnO-SiO2-TiO2-Ti2O3 System
Investigations on the Photoprotection Ability of TiO2 Coated on Copper
Phase Transformation in Fe-Based Alloys in High Magnetic Fields
Variant Selection in Fcc-to-Bcc Precipitation at Grain Boundaries in Ni-43Cr Alloy
Analysis of Porosity Characteristics in Weld Metal of High Strength Aluminum Alloy and the Effect of Mixed Shielding Gas
The Behavior of AlTiC Master Alloys in Grain Refining of Commercial and High Pure Aluminum
The Investigation on Aluminium Alloys Automobile Wheel with Low-Titanium Content Produced by Electrolysis
Production and Mechanical Properties of In-Situ Ti Alloying A356 Alloys
Thermodynamics-Based Constituent Design of Lithium Containing 7000 Series Aluminum Alloys
Mechanical Characteristic of Flowing Solidification under the Extrusion for the Mixture of the Liquid Aluminum with Sillimanite Particles
Compressive Properties and Energy Absorption of Hollow Sphere Aluminum
Control of Nano-Precipitates in Age-Hardenable Aluminum Alloys and Their Mechanical Properties
High Speed Roll Casting of Aluminum Alloy Strip
Interfacial Reaction and Strength of Dissimilar Joints of Aluminum Alloys to Steels for Automobile
Microstructures and Thermal Stability of the Metastable-Phase Precipitates Formed in an Al-Cu Alloy
Nano-Scale Clusters Formed in the Early Stage of Phase Decomposition of Al-Mg-Si Alloys
Study of Precipitation Sequence in Al-Mg-Si Alloys by HRTEM
The Metastable Phase Responsible for Peak Hardness and Its Morphology in an Al-Mg-Si Alloy
Dilute Alloy Designs of 7xxx Aluminum Alloys for Thick Forging Applications
Deformation Behaviors of 6061 and 7075 Aluminum Tubes at Elevated Temperatures for Warm Hydroforming
Development of Horizontal Reheating System for Semi-Solid Die Casting and Its Microstructure Evaluation
Effect of Be Addition on the Precipitation Behaviors and Mechanical Properties in Al-Cu-Li-Mg-Zr-(Ag) Alloys
Electrochemical Etching of Aluminum Foil for Electrolytic Capacitors
Evolution of Annealing Textures and Microstructures in AA 3103 after Cold Rolling and Repeated Shear Deformation
High Temperature Deformation Behavior of Pre-Sintered Al-10Si-5Fe Based Alloy
Microstructural Characterization of Rheology Material Fabricated by Rotational Barrel Type
Sliding Wear Characteristics of Ultrafine-Grained Non-Strain-Hardening Aluminum-Magnesium Alloys
The Effect of Electromagnetic Vibration on the Continuous Elimination of Inclusions in Molten Aluminum Alloy by Electromagnetic Force
The Effect of Electromagnetic Vibration on the Silicon Size at Hypoeutectic Al-Si Alloy
The Effect of Frequency of Electromagnetic Vibration on the Primary Silicon Size in Hypereutectic Al-Si Alloy
The Texture of 1050 Al Sheet Produced by Equal Channel Angular Pressing
Enhancement of Ductility in Aluminum Alloys by the Control of Transition-Metal Solutes during Thermo-Mechanical Processing
Localized Deformation of Equal Channel Angular Extruded Aluminum
A Low Environmental Load Modifying and Refining Treatment of Casting Al Alloys with RE
Closed-Cell Metal Foams Manufactured from Bulk Metal and Alloy Sheets through ARB Process
Effect of Solution Heat Treatment on Microstructure and Mechanical Properties of Al Alloy FOAM
Enhanced Mechanical Properties of A206 Aluminum Casting Alloy by Addition of Rare Earth Elements
The Influence of Processing Parameters on Mechanical Properties and Microstructure of Welding Zone for Ti3Al-TC4 Dual Alloy
Wear and Corrosion Behaviour of In-Situ Al-TiB2 Metal Matrix Composites
Materials and Processing Designs for High-Performance Magnesium Alloys
Development of Mg Alloy Sheets via Strip Casting
Effect of Section Thicknesses on Tensile Behavior and Microstructure of High Pressure Die Cast Magnesium Alloy AM50
Microstructure and Tensile Properties of Magnesium Alloy Containing Quasicrystallines Processed by Equal-Channel-Angular-Extrusion
Phase and Morphological Transformation of Preformed AZ91D Magnesium Alloys in Remelting
Study on Microstructure and Properties of Mg-9Al-xZn Alloys
Microstructure, Texture and Deformation Behavior of Lithium Containing Magnesium Alloys
The Influence of the Stirrer's Shape and Process Parameter on Friction Stir Welded MB3 Magnesium Joining
Effects of Rolling Condition on Warm Deep Drawability of Magnesium Alloy Sheets Produced by Twin-Roll Strip Casting
Grain Refinement in AZ91E Magnesium Alloy by Thermo-Mechanical Treatments
In-Situ Solid-State Synthesis of Mg Composite with Mg2Si Dispersoids
Magnesium Foam Produced from Bulk AZ31 Magnesium Alloy Sheets
Surface Modification on Magnesium Alloys by Coating with Magnesium Fluorides
The Forming Process of Magnesium Alloy for Japanese Home Electric Components
Vacuum Distillation Refining and Extrusion Process of Magnesium
Continuous Casting of Magnesium Billets for Semi-Solid Processing
Development of Creep Resistant Mg Alloys
Development of Mg-Al-Zn Based Diecasting Alloys for Elevated Temperature Applications
Effect of Rolling Conditions on Microstructure and Mechanical Properties of AZ31 Mg Alloy
Effects of Grain Refinement on Rollability of AZ31 Mg Alloy
Effects of Precipitates and Alloying Element on Microstructure and High Temperature Properties of Mg-Al Alloys
Fluxless Recycling of Die-Cast AZ91 Magnesium Alloy Scrap
Mechanical Properties and Texture Evolution of AZ31 Mg Alloy during Equal Channel Angular Pressing
Grain Refinement and Texture Evolution in AZ31 Alloy during ECAP Process and Their Effects on Mechanical Properties
The Joint Characteristics of Friction Stir Welded Mg-Zn-Y Alloy
Recrystallization in AZ31 Magnesium Alloy during Hot Deformation
Current Research Situation and Development of Titanium Alloy in China in Recent Five Years
Research on Semi-Solid Oxidation Behavior of Ti14 Alloy
Surface Roughness and Deformation of Grain during Tensile Plastic Deformation of Polycrystalline Titanium
Dislocation Structure for Ambient Temperature Creep in Titanium Metal
Effect of Heat Treatment on Microstructure and Mechanical Property of 45XD and 47XD TiAl Alloys
Effects of Contact Pressure on Fretting Fatigue Characteristics of Ti-4.5Al-3V-2Mo-2Fe with Acicular Alpha Structure
High and Low Cycle Fatigue of Orthorhombic Ti-22Al-27Nb Alloy
Effects of Microstructure and Environment on Fatigue Properties of Investment Cast Ti-6Al-4V Alloy Welds
Low Cycle Fatigue Behavior of a Near-a Ti Alloy Containing Rare Earth Nd
The Size Range of Volume Change of Melting
Progress of Directional Solidification in Processing of Advanced Materials
An Investigation of Structure Stability and Its Improvement on New Developed Ni-Cr-Co-Mo-Nb-Ti-Al Superalloy
Evolution of Internal Stress Field in Ni-Base Superalloy through Creep Deformation
Strengthening Mechanisms in Some Single-Crystal Superalloys
The Possibility of Cr-Base Alloys for High-Temperature Applications
Effect of Grain Size on Mechanical Properties of Single Phase Co-Ni-Cr-Mo Based Superalloy
Tensile Properties of HIP/DB'ed Ni-Base Superalloys
Phase Transition during Slow Heating in the Mixture Insert Metal Using TLP Bonded Interlayer
Influence of Microstructural Changes and Grain Boundary Precipitation on the Behavior of 25Ni-15Cr-2Ti Superalloy during High Temperature Creep
Assessment of Surface Damage in Thermally Aged FSX414 Cobalt-Based Superalloy Using Ultrasonic Rayleigh Wave

New Phases in a Multicomponent High Ruthenium Single Crystal Superalloy
Roll Bonding and the Application in Making FeCrAl Alloy
Interface Morphologies and Microstructure of a Single Crystal Superalloy under High Thermal Gradient Directional Solidification
Effect of Ta on the Oxidation Resistance of a Cast Nickel-Base Die Material with Low Cr and High W Content
Precipitation Behavior during Ageing Treatment of a Single Crystal Nickel-Base Superalloy
Room Temperature Deformation Behavior of Inconel718
Mechanical Behaviour of a Single Crystal Superalloy DD32 - A Comparison with the Alloy SRR99
Effect of Chromium on the Oxidation of a Fe-10 Al Alloy at 1000°C
The Control of Microstructures in (Mo1-x, Nbx) Si2 Intermetallics
Elastic and Thermal Expansion Anisotropy of Mo-Based 5-3 Silicides
An Assessment of Ir-Nb-X (X=Hf,Ta,Ti) Ternary Alloys for Ultra-High Temperature Applications
Solid Solution Hardening Effect of Ir
Microstructure and Mechanical Property of MoSi2 Based Composites
Powder Injection Molding of Niobium
High Temperature Oxidation in Multicomponent Nb Alloys
Oxidation Behavior of Rh-xTi Refractory Alloys
Bonding Character in the Laves-Phases TiCr2 and TiCo2
Growth of Single Crystals and Low Temperature Oxidation Behaviors of MoSi2 and NbSi2
Microstructure and Properties of Directionally Solidified NbSi2/ Nb5Si3 Composites
Microstructures and Properties of Ref