Sonstiges, Englisch, Band Volume 1115, 630 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
Sonstiges, Englisch, Band Volume 1115, 630 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
ISBN: 978-3-03859-275-4
Verlag: Trans Tech Publications
Collection of selected, peer reviewed papers from the International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014), September 23-25, 2014, Kuala Lumpur, Malaysia.
The 135 papers are grouped as follows:
Chapter 1: Non Conventional Processing Technology in Mechanical Engineering;
Chapter 2: Conventional Technologies of Processing in Mechanical Engineering;
Chapter 3: Ceramics and Building Materials;
Chapter 4: Metals and Alloys;
Chapter 5: Surfaces and Coatings;
Chapter 6: Polymers and Composites;
Chapter 7: Green Materials and Waste Recycling, Biotechnologies and Biomaterials;
Chapter 8: Nanomaterials and Nanotechnology;
Chapter 9: Details and Machine Components, Mechatronics and Automation;
Chapter 10: Manufacturing and Engineering Management
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Effect of Gap Voltage and Pulse-On Time on Material Removal Rate for Electrical Discharge Machining of Al2O3Effect of Powder Concentration on EDM Performance during Machining Mild SteelInvestigation of Surface Roughness and Material Removal Rate for High Speed Micro End Milling on PMMAInvestigation of Surface Roughness in Micro-EDM of Nonconductive ZrO2 Ceramic with Powder Mixed Dielectric FluidMaterial Removal Rate of Zirconia in Electro Discharge Micromachining Surface Quality Produced in EDM with Tungsten Carbide and Copper Compacted ElectrodesThe Effect of Etchant Concentration and Temperature on Surface Finish of Silicon Wafer ThinningHybrid Fabrication of Stainless Steel Channels for Microfluidic ApplicationAchievement of Ductile Regime Machining in High Speed End Milling of Soda Lime Glass by Using Tungsten Carbide Tool InsertCharacterization of Micromist for Effective Minimum Quantity LubricationCutting Temperature Behaviours in End Milling of Pocket by Applying Contour-In Tool Path StrategyEffect of Cutter Diameters on Surface Roughness Attained in High Speed End Milling of Soda Lime GlassEffect of Lubrication Conditions to the Cutting Force Coefficients in Machining ProcessEffect of Microwave Sintering Treatment to the Flank Wear of Titanium Carbide Tools in Milling OperationsEvaluating Delamination at Entry of Drilled Carbon Fiber Reinforced Polymer (CFRP) Composite with Diamond Coated Ball Nose DrillsExperimental Analysis of Cutter Engagement during High Speed End Milling of H13Influence of Machining Parameters on Temperature when Drilling Carbon Fiber Reinforced Polymer (CFRP) Using Coated Diamond DrillsInvestigation of Delamination at Exit of Drilled Carbon Fiber Reinforced Polymer (CFRP) Composite with Diamond Coated Ball Nose DrillsPreliminary Study: The Effect of Tool Engagement and Cutting Speed on Cutting Temperature during Contour Tool Path StrategySurface Roughness in Drilled Carbon Fiber Reinforced Polymer (CFRP) Composite Using Diamond Coated Ball-Nose DrillsTool Wear during Milling Laminated Carbon Fibre Reinforced PlasticMagnetic Damping in Turning of Stainless Steel AISI 304 for the Reduction of Machining Vibration and Tool WearEnergy Cost Optimization in High Speed Hard Turning Using Simulated Annealing AlgorithmFinite Element Modeling of Clinching Process for Joining Dissimilar MaterialsMulti Objective Optimisation for High Speed End Milling Using Simulated Annealing AlgorithmOptimization of Tool Wear Using Coupled RSM-GA Approach in Turning of Stainless Steel AISI 304 with Magnetic Damping of Tool ShankSurface Roughness Prediction in High Speed End Milling Using Adaptive Neuro-Fuzzy Inference SystemUsing the Desirability Function as an Effective Tool in Target Costing ModelCharacterization of Doped Titanium Oxide Varistor Powder Processed with Latex BinderEffect of Calcium Carbonate Replacement on Workability and Mechanical Strength of Portland Cement ConcreteEffect of Electron Beam Irradiation on the Morphology of Alumina CeramicEffect of Polycarboxylate Ether (PCE) Addition to Physical and Mechanical Characteristics of High Performance ConcreteEffect of Rice Husk Ash (RHA) on Physical Property and Mechanical Strength of ConcreteInvestigation of Low Voltage Varistor Using TiO2 as Base Material and SiO2, Bi2O3 and WO3 as Dopants Physical and Mechanical Properties of Concrete Incorporating Manufactured SandSynthesis of Co-Deposited Hexagonal Boron Nitride for Thermally-Efficient Tribological PerformanceSynthetic of Pure Alumina from Aluminum ScrapWear Characteristics of Multiple Particle Size Silicon Carbide Reinforced Aluminium CompositeThe Glass Transition Temperature of Iron and Titanium Containing Phosphate Based GlassesEffect of Tropical Climate Condition to Compressive Strength and Microstructure Properties of High Performance Fiber Reinforced Reinforced Concrete (HPFRC)Compressive Behaviour of Polyarcylonitrile Fibre Reinforced Lightweight Aggregate Concrete CompositeCost Analysis of Using Hybrid Microwave Post-Sintered Silicon Nitride InsertsEffect of Sintering Schedule to the Alloyability of FeCrAl Powder Mix Formed at above Ambient TemperatureEffect of Temperature on the Wear Properties of Alloy Steel under Jatropha Curcas BiodieselFracture Behavior Issues in HSLA Pipeline Steels - A ReviewThe Effects of Sliding Parameters on Dry Wear Characteristics of Ti-6Al-4V AlloyPrediction of Crack Growth Propagation of a Super Alloy through ANN ModelingEffects of Surfactant on Corrosion Behavior of Carbon Steel in Simulated Crude OilFormation of Hydrophobic Surface Using Two Stages Electrodeposition MethodPhysical Properties of Electroless Nickel-Tungsten Coating on Mild Steels Obtained from Acetic BathSurface Features of TIG Melting Coated CP-TitaniumOptimization of Hardness Behaviour of TIG Modified Ceramic Coating Using the Taguchi ApproachCorrosion of Surface Modified AISI 4340 Steel in Jatropha BiodieselA Study on the Mechanical and Thermal Properties of ENR Filled with Dual FillersConductive Polymer Composites from Polylactic Acid/Natural Rubber Filled with Carbon BlackCrush Zone Morphology of Epoxy-Glass Fiber-Aluminium Composite Columnar Tube due to Longitudinal Crushing ForceEffect of Clamshells Filler Loading on the Tensile Properties of PolyhydroxybutyrateEffect of Electron Beam Radiation on Water Absorption of Hybrid Kenaf-Glass Unsaturated Polyester CompositeMechanical Properties of Bamboo Fibre Composite Incorporating Pulverized Fuel AshMechanical Properties of Kenaf Core Sandwich Panel Toughened with Modified EpoxyMorphology and Mechanical Properties of MIM Feedstock Using TPNR Backbone BinderNumerical and Experimental Investigation on Tensile Properties of Natural-Sand Reinforced PolypropylenePerformance Properties of Hybrid Aluminium?Composite Columnar Tube under Axial Crush ForcePhysical and Mechanical Properties of Waste Sawdust Polymer Composite for Marine ApplicationPolyhydroxybutrate Filled Clamshell Biofiller: Effect of PolyvinylpyrrolidoneSEM Analysis of Kenaf Sandwich PanelThe Effects of Various TPNR Binder Compositions on Feedstock Preparation for MIM ProcessA Light Material for Wind Turbine BladesCharacterization of Rattan Waste for Binderless Particleboard (BPB) ProductionEffect of Fibre Surface Treatment on the Properties of Eco-Core Sandwich StructuresEffect of Organic Loading Rate (OLR) of Slurry on Biogas Production QualityGreen Polyurethane Adhesives for Wood BondingProduction and Chemical Compounds of Gaharu Extract by Using Supercritical Fluid Extraction (SFE) of Unsoaked Gaharu at Different PressureSol-Gel Derived Zinc Doped Calcium Phosphate Bioceramics Prepared via Different Sintering StrategiesStructural Applications and Emerging Trends of Nano- and Biocomposites: A ReviewTensile and Statistical Analysis of Sisal Fibers for Natural Fiber Composite ManufactureThermal Analysis on Dehydroxylation of Sol-Gel Derived Zinc Doped Calcium Phosphate PowdersTrans-Esterification of Crude Palm Oil Liquid Waste to BiodieselProduction of Carbon via Electrochemical Conversion of CO2 in Carbonates Based Molten SaltCharacterization and Preparation of Sago Starch (SS) Based Reinforced with Silver Nanoparticle (SNP)Effect of Copper Concentration on the Optical Properties of Cu2Zn0.8Cd0.2SnS4 Pentrary Alloy NanostructuresEffect of Dispersants on Microstructures of Nano Alpha Alumina Developed from Aluminium Dross WasteEffect of Nanofiller on Flexing Mechanism of HDPE/EPR Nanocomposite for Sport Shoe Sole ApplicationEffect of Voltage on Colloidal Gold (Au) Nanoparticles Produced Using Electro-Dissolution-Reduction MethodGamma Irradiated Starch Based Hydrogel Impregnated with Silver NanoparticleMechanical and Physical Properties of Sago Starch/Halloysite Nanocomposite FilmMorphology of CNT-AL Nanocomposite under Different Ball Milling ParametersStudy of Mechanical and Flammability Properties of Polypropylene/Microcrystalline Cellulose Composites Filled with Nano-sized Aluminium Hydroxide (ATH) ParticlesThe Effects of Coupling Agent on the Flame Retardant Properties of PP/ATH NanocompositesFinite Element Analysis of HDPE/EPR-CNT Nanocomposite under Tensile LoadingFinite Element Analysis of Tensile Test for HDPE/EPR-MMT NanocompositeFabrication and Characterization of Graphene from Solid Carbon DioxideEffect of Temperature on the Optical and Morphological Properties of Zinc Oxide Thin Films Prepared by RF Magnetron SputteringLow-Cost Synthesis and Characterizations of Metal-Organic Framework (MOF-199) Materials by Nonsurfactant Templating MethodA Triangular Double Layer Microchannel Heat Sink: Effect of Parallel and Counter FlowActive Vehicle Suspension Control Using Full State-Feedback ControllerDesign and Development of a Solar Based Air Conditioning Blower System for VehicleDesign, Fabrication and Flight Testing of a Surveillance UAVDevelopment of a Shape Memory Alloy (SMA) Based Assistive HandDevelopment of an Automatic Plant Monitoring SystemDevelopment of Catalytic Converter Using Non-Precious MetalsEffect of Coolant Plate Geometry and Material in a Freshwater Production System: An Experimental StudyEvaluation of Orifice Flow Meter Accuracy under Pulsation ConditionsExperimental Investigation on Magnetorheological Damper?s CharacterizationFundamental Study of Diesel Engine Performance by Implementing Oil from Tropical Kepayang Seeds (Pangium edule)Mini-ATX Computer System in VehiclePerformance Analysis of Heat Pipe Heat Exchanger for Solar Hybrid Desiccant Air-Conditioning SystemRemote Interior Temperature Control of Parked VehiclesTwo Degree of Freedom Plotter Using Robotic ArmWeld Hardness Study of P91 Welded Pipes with Post Weld Heat Treatment for Elevated Temperature Application in Power PlantsA Higher Order Theory for Bending of Cross Ply Laminated Cylindrical Shell under Hygrothermal LoadsDesign and Fabrication of a Winged Hybrid Airship Model for IIUM-LSWTMode I Stress Intensity Factor for a Cracked Plate with an Integrated Piezoelectric ActuatorSimulation of Low Velocity Impact Test on Carbon/Epoxy Composite PlatesStress and Deformation Analysis of Aircraft's Fuel Tank under Different Inertia Load Cases in Addition to a Static Test Pressure Using FEATransfer Function Prediction of a Lithium Iron Phosphate Battery with Nature-Inspired ApproachDesign and Development of a Versatile Ice Clamping SystemFinite Element Simulation of Electro-Mechanical Impedance TechniqueMicroelectrode Design for Particle Trapping on Bioanalysis PlatformA Piezoelectric Based Energy Harvester with Magnetic Interactions: Modelling and SimulationComparative Study of SPWM and HEPWM Techniques for Photovoltaic InverterEffects of Piezoelectric Actuation on Delamination in Transversely Loaded Composite PlatesThermoelastic Solutions for Flexure of Anisotropic Cylindrical ShellsIIUM CubeSat Structural Subsystem DesignClustering Using Genetic Algorithm-Based Self-Organising MapLEADME: An Educational Software for Composite Laminate Analysis and DesignA Case Study on Business Environmental Assessment in Malaysia and UK Metal and Fabrication SMEsAdoption and Adaptation of Japanese Manufacturing Management in an Automotive Company of MalaysiaPainting Process Improvement through Six Sigma Approach in a Malaysian Vehicle Assembly CompanyRanking of Manufacturing Attributes Affecting Bread Quality: Application of Analytic Hierarchy ProcessDevelopment of Design Structure Matrix of Product Architecture Case Study: Multi Purpose CNC RouterDesign of a Heuristic for Balancing a Multi-Stage Production Flow LineFormulation of an IP-Based Model for Reactive Flow-Shop Scheduling Problem Subject to Arrival of New OrdersParameter Optimization of VMI System in a Manufacturer and Multi Retailer Using Genetic AlgorithmRapid Prototyping as a Tool of Fabricating Biomodel in Medical Applications: Technique and Cost Evaluation
