Advanced Cutting and Machining Processes for Composites and Biocomposites

Erscheinungsjahr 2025
ISBN: 978-0-443-23705-8
Verlag: Elsevier Science

Buch, Englisch, 590 Seiten, Format (B × H): 152 mm x 229 mm

Advanced Cutting and Machining Processes for Composites and Biocomposites focuses on the latest advances in this important research field, covering a broad range of composites and presenting various case studies related to conventional and unconventional cutting processes in terms of optimization, cutting analysis, and cutting tools. Key challenges in terms of quality and their impact on the final product are also discussed in detail. The book also contains experimental studies that explain how various machining and cutting techniques can be used to obtain the best results by controlling different operating input parameters.

This will be a valuable reference resource for materials scientists, designers, manufacturers, and engineers as it provides extensive information on cutting and machining of composite materials as well as the cutting properties of these materials. It also presents experimental results and final concepts that will benefit manufacturers to achieve efficient cutting operations to avoid defects and reduce their impact on the final product.

Autoren/Hrsg.

Sapuan, S M

M Ariffin, MKA

Nukman, Yusoff

Bayraktar, Emin

Masoud, Fathi

Yavas, Denizhan

Yava&

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

1. Investigating the effect of machining parameters on the resultant machining force during end milling of CFRP-Aluminium Composites
2. The development of Coating Materials Used for Cutting Tools: A Review
3. Optimisation of the laser cutting process of natural fibre reinforced polymers.
4. Dimensional stability investigation in cutting process of natural fibre reinforced polymers with laser beam cutting technology
5. Dimensional stability investigation in cutting process of natural fibre reinforced polymers with water jet cutting technology
6. Water jet cutting edge analyses of PE/PU-rubber based composites reinforcements with glass fibre and carton fibre
7. Cutting analysis of pre-rubber composites reinforced with glass bubble and glass fibre
8. Natural fibres cutting with water jet and effect of cutting edge/conditions on the mechanical properties time dependent - cyclic test conditions
9. Machining effect on the mechanical properties of aluminium matrix composites reinforcement with alumina fibre and glass fibre.
10. Aluminium fibre and rice ash reinforced AlCu composite: Cutting and machining on the mechanical properties
11. Cutting properties of PE PU mixture matrix reinforced with natural fibre hemp
12. PU rubber composites reinforced with marine fibres: Cutting edge effect on the fatigue properties
13. Multi hole cutting on composite panel - A feasibility study
14. Machining parameter effect on 3 D printed part using natural fibre composite filament
15. Advances in surface polishing as a surface modification method for 3D-printed components
16. Thermal damage on Carbon Fibre Reinforced Polymer (CFRP) machined surface during end milling of CFRP
17. Ultrasonic Assisted Drilling of CFRP/Ti Stacks.
18. Analysis of cutting-edge rounding (CER) on end mill tool when milling glass fibre reinforced polymer composites
19. Cut quality characteristics of wood plastic composite by single-mode fiber laser
20. Tool wear in machining processes for fiber-reinforced polymer composites

Über Autor(innen)

Bayraktar, Emin
Emin Bayraktar (Prof. Emeritus, Habil., Dr (Ph.D.), DSc-Doctor of Science) is an academic and research staff member in Mechanical and Manufacturing engineering at SUPMECA/Paris, France. His research areas include manufacturing techniques of new materials (basic composites-hybrid), metal forming of thin sheets (design + test + FEM), static and dynamic behavior and optimization of materials (experimental and FEM-utilization and design of composite-based metallic and non-metallic, powder metallurgy, and energetic material aeronautical applications), metallic-based and non-metallic materials, powder metallurgy and metallurgy of steels, welding, and heat treatment, as well as the processing of new composites, sintering techniques, sinter-forging, and thixoforming,. He has authored more than 200 publications in International Journals and Conference Proceedings and has also authored more than 90 research reports (European = Steel Committee projects, Test + Simulation). He is a Fellow of WAMME (World Academy of Science in Materials and Manufacturing Engineering), an Editorial Board-Member of JAMME (International Journal of Achievement in Materials and Manufacturing Engineering), an Advisory board member of AMPT-2009 (Advanced Materials Processing technologies), and a member of APCMP-2008 and APCMP-2010.

Nukman, Yusoff
Professor Ir. Dr. Nukman bin Yusoff is a Professional CAD/CAM Engineer registered under the Board of Engineers Malaysia. He acquired his PhD from Loughborough University, UK (in the field of Laser Materials Processing) in 2009 and master's in engineering science, (Mechatronics) from De Montfort University, UK in 1998. He acquired his first degree in CAD/CAM from the University of Central England in Birmingham, UK. Since then, he has been teaching undergraduate courses in the field of CAD/CAM and Manufacturing and graduate level teaching in Manufacturing Automation and Control and other fields in Manufacturing. He was appointed as Head of Department of Engineering Design & Manufacture in 2007 till 2009. Since working at the University of Malaya he has been actively conducting research in the field of Laser Materials Processing, Human Factors, CAD/CAM, CNC and Manufacturing Process and Management.

Yavas, Denizhan
Dr. Yavas is an Ass Professor in the Department of Mechanical Engineering at Rice University. He holds a Ph.D. in aerospace engineering with a minor of engineering mechanics from Iowa State University, along with M.Sc. and B.S. degrees in mechanical and aerospace engineering from Middle East Technical University. Prior to joining Rice University, he held a faculty position at the University of Central Florida. With over 15 years of experience in research and teaching in mechanical and aerospace engineering, Dr. Yavas specializes in experimental and computational solid and fracture mechanics. His focus areas include deformation and failure mechanisms in advanced composite and additively manufactured materials, development of architected and tunable materials, mechanics of thin films and multilayered materials, and interfacial fracture and ice adhesion.

M Ariffin, MKA
M. K. A. Ariffin is a Professor within the Department of Mechanical and Manufacturing Engineering, at the Universiti Putra Malaysia, Serdang, Malaysia. During his career, he has supervised 14 Ph.D. students. He has also published over 70 technical papers in national and international journals/conferences. His current research interests include machining processes, finite element analysis, and optimization. Professor Ariffin is a member of the American Society of Mechanical Engineers, the Institute of Engineers Malaysia, and the Malaysian Society for Engineering and Technology.

Masoud, Fathi
Fathi Masoud is currently working as a doctorate student/research assistant in the Department of Mechanical and Manufacturing Engineering, at the University Putra Malaysia. His main areas of research are CAD, Design Engineering, Computer-aided Engineering and Design Optimization.