Salgado / Filho Advanced Powder Technology V

Erscheinungsjahr 2006
ISBN: 978-3-03813-052-9
Verlag: Trans Tech Publications
Format: PDF
Kopierschutz: 0 - No protection

E-Book, Englisch, 770 Seiten

Volume is indexed by Thomson Reuters CPCI-S (WoS).This interesting volume focuses on powder production, sintering mechanisms, sintering furnaces and nanomaterials, automotive applications and perspectives on the future.

Autoren/Hrsg.

Salgado, Lucio

Filho, Francisco Ambrozio

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

POWDER METALLURGY
Characterization
Study of the Recycling Grey Cast Iron Swarf by Powder Metallurgy: An Alternative for the Development of New Materials
Sintering of a Gamma Ti-Al Alloy
Grain Size of Commercial High Speed Steel
Porosity Study of Sintered Titanium Foams
Concentration Profiles and Iso-Concentration Curves for Batch Settling Using the Gamma Rays Attenuation Technique
Analysis of the Behavior of Solid-Liquid Systems Based on the Shape, Size Distribuition and Density of the Solid Particles
Thermal Properties Measurement Photoacoustic Technique for Hardmetals
An Overview of the Microstructures Present in High-Speed Steel -Carbides Crystallography
Microstructural Characterization of Equiatomic NiTi Alloy Prepared by High Energy Milling
Separation of Effects due to Superimposition Using the Rietveld Method in Spectra Obtained by WDXRF
Sintered Valve Seat Inserts – Microstructural Characterisation
Corrosion & Mechanical Properties
Chemical, Electrochemical and Morphological Characterization of Poly-{trans-[RuCl2(vpy)4]} Films Deposited on Nd-Fe-B Magnets and on Inert Materials
Study of Corrosion Resistance of Sintered Fe-2%Ni, Fe-5%Ni and Fe 10%Ni with Electroactive Polymeric Coating of Poly trans-[RuCl2(vpy)4]
Studies on the Preparation, Characterization and Corrosion Behaviour of Injection Molded 316L Steel Electrochemically Coated by Poly{trans[dichloro (4-vinylpyridine) ruthenium]}
Improvements in P/M Green Strength using Micronized Cellulose Particles (MCP)
Effect of Addition of Rare Earth Oxide Concentrates on Oxidation Resistance of AISI 304L
The Corrosion Behaviour of TiN-Coated Powder Injection Molded AISI 316L Steel
Corrosion Resistance of Nd-Fe-B Magnets Coated with Polypyrrole Films
High Temperature Erosion-Oxidation Behavior of Thermally Sprayed NiCr Based Alloy and Cermets Coatings
The Corrosion Behaviour of a Hypereutectic Al-Si Alloy Obtained by Spray Forming in Acid, Neutral and Alkaline Solutions
Heat Treatment
Microstructure of Plasma-Sintered Aluminum Bronze Powder Compacts
Evaluation of Mechanical Properties and Microstructure of a High Carbon-Vanadium Tool Steel Produced by Powder Metallurgy
Magnetic Materials
Effect of Grain Size,Lattice Defects and Crystalline Orientation on the Coercivity of Sintered Magnets
Modelling the Heat Treatment of Sintered SmCo5 Magnets
Zr-Rich Phases in Sm(CoFeCuZr)z Magnets
The Influence of Si, Ga and Gd Content on the Magnetic Properties of Pr-Fe-Co-B-Nb HDDR Bonded Magnets
The Influence of Al, Cu and P Content on the Magnetic Properties of PrFeCoBNb-Based HDDR Magnets
Curie Temperature Determination of Pr14Fe79.9-xCoxB6Nb0.1 Permanent Magnet Alloys
Reduction-Diffusion Preparation of Nd15Fe77B8, NdFe11Ti, NdFe10.5Mo1.5 and NdFe10.75Mo1.25 Alloys for Magnets
Sm2Fe17Nx Produced by Calciothermic Reduction Using Different Iron Powders
Mechanical Alloying
Design of a Machine by Low Cost and the High Performance for Produced Powder Materials
Preparation of Ta-12.5Si-25B Powders by Mechanical Alloying
Mechanical Activation of Nb75Al Mixtures Using Shaker and Planetary Ball Mills
High-Energy Ball Milling of Ni-Ti and Ni-Ti-Nb Powders
Syntheses of the Ni3Ti, NiTi, and NiTi2 Compounds by Mechanical Alloying
Metal Injection Moulding
Plasma Assisted Debinding and Sintering (PADS) – Metal Injection Molding Application
On the Use of Elemental Powders to Process Fe-50Co Alloys by Powder Injection Molding
Production of Composite Parts of H13 and 316L by Two Components Injection Molding
Metal Matrix Composites
Composite Materials Based on EN AW-Al Cu4Mg1(A) Aluminum Alloy Reinforced with the Ti(C,N) Ceramic Particles
Effect of Sintering Temperature in Physical-Mechanical Behaviour and in Titanium-Hydroxyapatite Composite Sinterability
Properties of AA6061 Aluminum Alloy Reinforced with Different Intermetallics and Ceramics Particles
Gradient Nickel – Alumina Composite Coatings
Structure and Properties of Gradient Layers Using High Power Diode Laser
Powder Production & Compacting
Efficiency in Powder Compacting Technology
2D Model for Ball Mills
Processing
Comparative Study of the Efficiency among Conventional Cyclones and Cyclones with Filter
Continuous Binder-Powder Coating for the Production of Ti/SiC/C Composites
Effects of Operational Variables on the Performance of Venturi Scrubbers with Circular Section
Influence of Forming on the Mechanical Properties of the Al + 50 % B4C System
Titanium Powder on Surface Conditioning of Osseointegrable Surgical Implants Topographics Aspects
Performance Assessment of Spray Formed AISI M2 High-Speed Steel Tools
Properties
Effect of High Energy Milling on the Magnetic Properties of the WC-10wt.%Co Cemented Carbides
Ultra High Carbon Steels Obtained by Powder Metallurgy
Structure and Properties of the 32CrMoV12-28 Steel Alloyed with WC Powder Using HPDL Laser
Sintering
Densification and Microstructural Behaviour on the Sintering of Blended Elemental Ti-35Nb-7Zr-5Ta Alloy
Influence of the Addition of Rare-Earth Elements on the Sintering of Cemented Carbide
Fabrication of Sintered Compact from Aluminum Powder Coated with Tin Deposits by Magnetron DC Sputtering
Sintering of AISI M3:2 High Speed Steel – Part II
Laser Sintering of Greens Compacts of MoSi2
Miscellaneous Powder Metallurgy
Effect of Operational Parameters in the Droplet Size of a Venturi Scrubber with Multi-Orifice Injection
Computational Fluid Dynamics Applied to Bradley Hydrocyclones
The Use of CFD Technique in the Study of the Spouted Bed
CERAMICS
Electric - Electronic
Preparation and Characterization of Zirconia-Yttria/Zirconia-Magnesia Composites
Synthesis of Ceramic Powders Based on Manganese, Cobalt and Nickel Oxides
Synthesis and Characterization of Nanosized ZrTiO4 Powders Prepared by the Sol-Gel Method
Mechanical Properties and Microstructure of Zinc Oxide Varistor Ceramics
Development of ZrO2-TiO2 Porous Ceramic as Soil Humidity Sensor for Application in Environmental Monitoring
Matrix Composites
Microstructure Characteristics of Ce-ZTA Ceramic Composites Obtained by Liquid Phase Sintering
Design of the Particle Size Composition of an Alumina Powder Matrix for Maximum Flowability and Minimum Water Content
Processing
The Use of Granite and Kaolin Residues as Raw Materials to Obtain Ceramic Tile
Effect of the Particle Size of the Grog on the Properties and Microstructure of Bricks
Brazilian Raw Materials Doped TiO2 Based Electroceramics
Influence of the Type of Dispersant on the Properties of Casting Slips of Porcelains with Soda-Lime Glass
Sintering Properties of ZrO2 - 3 Mol % Y2O3 Obtained from Mixture of Nano and Microcrystalline Powders
Compaction Behavior Study of Powder Composed by Nanoparticle Agglomerates and Aggregates
Incorporation of Granite Waste into Vitrified Ceramic Tiles
Brazing of Al2O3 with Rapidly Solidified Melt Spun Ni-Cr-P Alloy Ribbons
X-Ray Diffraction Study of Particulate Tannery Waste Solidified in Cement
Structural
Effects of Raw Materials on the Technological Properties of Brick Compositions Using a Statistical Design Approach
Effect of Quartz of Fine Particle Size on Porcelain Properties
Structural Characteristics of the Modern Sintered Tool Materials
Sintering and Properties
Synthesis and Determination of the Kinetic Parameters for Non-Isothermal Decomposition of Complexes Ln(thd)3phen
Synthesis and Kinetic Study by Ozawa Method of the Thermal Decomposition of Complexes Ln(thd)3phen
Influence of Sintering on Electrical Properties and Phase Transition of La2Mo2O9
Effect of Isothermal Sintering Time on the Properties of the Ceramic Composite ZrO2-Al2O3
Microstructural Variations in SiC Ceramics Sintered with AlN-Y2O3
Effect of the Particle Size of an Ash from Sugarcane Bagasse in the Properties of Red Ceramics
Recycling of Steel Sludge into Red Ceramic
Effect of Thermal Treatment under Oxygen Atmosphere on the Superconducting Properties of RuSr2GdCu2O8
Anelastic Behavior due to Interstitial Oxygen in SmBa2Cu3O7-d
Hardness and Toughness of Aluminum Porcelains Measured by the Indentation Test
Synthesis & Biomaterials
Study of Calcium Phosphate Deposition on Porous Titanium Samples
Effect of Al2O3 Addition on the Mechanical Properties of Biocompatible ZrO2-Al2O3 Composites
Phase Transition Behaviour of Tricalcium Phosphate (TCP) Doped with MgO and TiO2 as Additives
Obtention of TCP Porous Ceramic Using Albumin
Phosphoric Acid Rate Addition Effect in the Hydroxyapatite Synthesis by Neutralization Method
Biomimetic Coatings on Ti-Based Alloys Obtained by Powder Metallurgy for Biomedical Applications
Ceramic Bonding to Biocompatible Titanium Alloys Obtained by Powder Metallurgy
Effect of Calcination Conditions on Phase Formation of Calcium Phosphates Ceramics Synthesized by Homogeneous Precipitation
Synthesis & Ceramic Powders
Synthesis and Characterization of Ni-Cu/ZrO2 and Co-Cu/ ZrO2 Catalysts Used for Ethanol Steam Reforming
Mullite Preparation from Kaolin Residue
Combustion Synthesis of a-Al2O3 Powders
Nanosize Nickel Ferrite Particles Synthesized by Combustion Reaction: Evaluation of Two Synthesization Routes
Solid Oxide Fuel Cells: Strontium-Doped Lanthanum Manganite Obtained by the Citrate Technique
Synthesis of Lanthanum Beta Alumina by the Polymeric Precursor Technique
Synthesis of Alumina Powders by Mechanical Activation
Microstructure Study of Alumina Ceramics from Powder Mixtures of Nano and Microsized Particles
Ba2Ti9O20 Ceramic from BaSO4 AND TiO2 Powder Synthesis Mixture
Sintering of Cobalt and Strontium Doped Lanthanum Chromite Obtained by Combustion Synthesis
3YTZP-Al2O3 Powders Synthesized by the Coprecipitation Route
Zirconium Titanate: Synthesis and Processing of Fine Powders Prepared by Chemical Route
Miscellaneous Ceramic
Influence of Zirconia Plasma-Sprayed Coating on Creep of the Ti-6Al-4V Alloy
Combustion Synthesis as a Preparation Method of Perovskites with Cerium for Metane Oxidation
Physical Properties of Nylon 66/Organoclay Nanocomposites
Influence of Organoclay on the Physical Properties of Polyethylene Nanocomposites
Characterization of Sludge after Thermal Treatment
Contribution to a Technological Characterization of Kaolins from Cuba and Brazil
Selective Siliceous Ore Flotation for Further Apatite Recovery
A Case Study of the Ceramic Matrix Sintering of Sewage Sludge when Fired at High Temperatures
Thermal Analysis of Municipal Sludge Waste Combustion
The Dimensional Change in the Sintering of a Plain Iron Powder and High-Alloyed Iron Powder Mixtures