Buch, Englisch, 1648 Seiten, Format (B × H): 165 mm x 244 mm, Gewicht: 2567 g
Buch, Englisch, 1648 Seiten, Format (B × H): 165 mm x 244 mm, Gewicht: 2567 g
ISBN: 978-0-470-47418-1
Verlag: Wiley
Ceramic Transactions (CTs) books contain papers presented at the Annual Meeting of the American Ceramic Society, other regional and division conferences, as well as meetings held by related societies and organizations.
Volumes 200 and 201 contain papers presented at The 15th International Conference on the Texture of Materials from June 1-5th, 2008 in Pittsburgh, PA.
Autoren/Hrsg.
Weitere Infos & Material
Materials Processing and Texture TOC:
Preface xv
Acknowledgments xvii
Friction Stir Welding and Processing
Texture Evolution during Friction Stir Welding of Stainless Steel 3
Jaehyung Cho
Texture Development in Aluminum Friction Stir Welds 17
Richard W. Fonda, Keith E. Knipling, John F. Bingert, Anthony P. Reynolds, Wei Tang, Kevin J. Colligan, and John A. Wert
Microstructural Studies of a Friction-Stir-Welded AA5052 29
N. T. Kumbhar, Santosh. K. Sahoo, R. Tewari, G. K. Dey, I. Samajdar, and K. Bhanumurthy
Effect of Microstructure on Mechanical Properties of Friction-Welded Joints between Aluminum Alloys (6061, 5052) and 304 Stainless Steel 35
Í. T. Kumbhar, A. Laik, G. K. Dey, Ê. Bhanumurthy, J. Krishnan, D. J. Derose, R. L. Suthar, S. K. Sahoo, and I. Samajdar
Effect of Texture on Fracture Limit Strain in Friction Stir Processed AZ31F3Mg Alloy 43
Yutaka S. Sato, Akihiro Sugimoto, Hiroyuki Kokawa, and Chang-Woo Lee
Microstructure and Texture Analysis of Friction Stir Welds of Copper 53
T. Saukkonen., K. Savolainen, J. Mononen, and H. Hänninen
Texture and Anisotropy In Steels
The Effects of Texture on the Corrosion Resistance of SS304 Stainless Steel 63
M. Azzi and J. A. Szpunar
Microstructural Characterization of Dual Phase Steels by Means of Electron Microscopy 71
Liesbeth Barbé and Kim Verbeken
Grain Size Effect on the Tensile Behavior of a FeMnC TWIP Steel in Relation with the Microstructure and Texture Evolutions 79
David Barbier, Nathalie Gey, Alain Sébastien, and Michel Humbert
Combination of Two X-Ray Diffraction Settings for Determining the Texture of Small Sheared Samples 87
D. Barbier, Â. Bolle, J. J. Fundenberger, C. Laruelle, and A. Tidu
Texture of Non-Oriented Rolled Steels by X-Ray and Electron Diffraction 95
Martin Öernik, Milos Predmersky, Andrej Lesko, and Erik Hilinski
Effect of Coating Texture on Powdering Behavior of Industrially Produced Galvannealed Coating on IF, IFHS and HSQ Grade Steels 103
A. Chakraborty, R.K. Ray, and D. Bhattacharjee
Including Elastical Anisotropy Due to Texture in a Finite Element Model for the Prediction of Residual Stresses in Welds 115
Koen Decroos, Carsten Ohms, and Yvan Houbaert
Texture and Microstructure Evolution in a Fe-Si CGO Sheet during the Processing Route before Secondary Recrystallization 123
Francisco Cruz-Gandarilla, Richard Penelle, Thierry Baudin, Hector Mendoza Leon, and J. G. Cabanas-Moreno
TEM Study of the Inhibition Layer of Commercial Hot-Dip Galvanized Steels 131
Jack Elia, Å. Petit, J -S Lecomte, B. Gay, and V. Pitchon
Measurement of the Texture Sharpness in Grain-Oriented Electrical Steels 143
M. Frommert, C. Zobrist, D. Raabe, S. Zaefferer, and L. Lahn, Á. Böttcher
Effects of Composition and Coiling Temperature on Precipitation and Texture Formation in a Few Interstitial Free High Strength Steels 151
Pampa Ghosh and R Ê Ray
Microstructure and Texture Development in Warm Rolled High Strength IF Steels Containing Cu, Ñ and  161
Arunansu Haldar and Chiradeep Ghosh
Effect of Tin on the Texture of Nonoriented Electrical Steels 173
Chun-Kan Hou, Tong- Han Lee, and Chun-Chih Liao
Effect of Cold Rolled Reduction on the Texture and Plastic Strain Ratio of 2205 Duplex Stainless Steel 183
Chun-Kan Hou and Chang-Chia Liu
Importance of Dislocation Substructures in Texture Control of Low Carbon Steel 193
Hirosuke Inagaki
Texture Control in Manufacturing Current and Future Grades of Low-Carbon Steel Sheet 207
Leo A.I. Kestens and Roumen Petrov
Relative Preference for Strain Localizations in Ultra Low Carbon Steel 217
R. Khatirkar, L.A.I. Kestens, R. Petrov, and I. Samajdar
Influence of Texture on Surface-Roughening during Press Forming in Ti Added High Purity Ferritic Stainless Steel Sheets 223
Ken Kimura, Masaharu Hatano, and Akihiko Takahashi
Effect of Tin on the Recrystallization Behavior and Texture of Grain Oriented Electrical Steels 231
Chun-Chih Liao, Chun-Kan Hou
EBSD Investigation of Phase Transformation in Low Carbon Steels 243
Sophie Lubin, Anne-Françoise Gourgues-Lorenzon, Hélène Regle, Frank Montheillet, and Brigitte Bacroix
A Monte-Carlo Algorithm for the Zener Drag Effect in the Fe-3%Si Magnetic Alloys 251
N. Maazi, R. Penelle, A. L. Etter, and T. Baudin
Effect of Strain and Strain Path on Deformation Twinning and Strain Induced Martensite in AISI 316L and 304L Austenitic Stainless Steel 257
S. K. Mishra, P. Pant, K. Narasimhan and I. Samajdar
Analysis of the Formation and Growth of Recrystallizing Grains in IF Steels by In-Situ EBSP 265
H. Nakamichi and F. J. Humphreys
Stability of Secondary Recrystallization in Grain-Oriented Silicon Steel 275
Eiichi Namba, Satoshi Arai, Hotaka Homma, and Yoshiyuki Ushigami
A Practical Investigation into Identifying and Differentiating Phases in Steel using Electron Backscatter Diffraction 285
Matthew M. Nowell, Stuart I. Wright, and John O. Carpenter
Influence of Precipitate Distribution on Normal Grain Growth Simulation at the Beginning of the Secondary Recrystallization Annealing in a Fe-3%Si Electrical Steel HiB - Role of the MnS and AIN Precipitates 293
C. Sekkak, N. Rouag, and R. Penelle
Microstructure and Texture Development during Cold Ring Rolling of 100Cr6 301
K. Ryttberg, M. Knutson Wedel, L. Nyborg, and P. Dahlman
Development of Texture, Microstructure and Grain Boundary Character Distribution after Heavy Cold Rolling and Annealing in a Boron Added Interstitial Free (IF) Steel 311
Rajib Sana and R. K. Ray
Texture of Nb-Containing Ferritic Stainless Steel after Secondary Recrystallization 317
Rodrigo P. Siqueira, Hugo R. Z. Sandim, and Tarcisio R. Oliveira
Quantitative Prediction of Transformation Texture in Hot-Rolled Steel Sheets by Multiple KS Relation 325
Toshiro Tomida, Masayuki Wakita, Mitsuru Yoshida, and Norio Imai
Crystallographic Characterization of a Phosphorus Added TRIP Steel 333
Kim Verbeken, Liesbeth Barbé, and Dierk Raabe
Microstructural and Textural Evolutions in a Cold Rolled High Mn TWIP Steel 341
Kim Verbeken, Lieven Bracke, Leo Kestens, and Jan Penning
Stored Energy Evolution in a Cold-Rolled IF Steel 349
A. Wauthier, B. Bacroix, T. Chauveau, O. Castelnau, and H. Réglé
A Comparison of Texture Measurements Via EBSD and X-RAY 357
Stuart I. Wright and Matthew M. Nowell
The Measurement Approach of X-Ray Residual Stress in Fe-Ni Alloy with Different Textures 365
Qiulin Wu, Xiaojun Hu, Zuming Fu, Haiyan Zhao, Bing Zhang, Yong Wang, Wei Fang, and Limin Li
Influence of Grain Orientation on Magnetic Aging Behavior of a Non-Oriented Silicon Steel Sheet 371
L. Xu, W. Mao, P. Yang, and H. Feng
Effects of Magnetic Fields
Eutectoid Point Shift and Orientation Relationships between Ferrite and Cementite in Pearlite in a High Magnetic Field 381
Y. D. Zhang, C. Esling, H. Klein, X. Zhao, and L. Zuo
Characteristics of Recrystallization Texture of Cold-Rolled IF Steel Sheet Annealed with a Magnetic Field in the Transverse Direction 389
Yan Wu, Changshu He, Yudong Zhang, Xiang Zhao, Liang Zuo, and Claude Esling
Crystallographic Features during Martensitic Transformation in Ni-Mn-Ga Ferromagnetic Shape Memory Alloys 397
D. Y. Cong, Y. D. Zhang, C. Esling, Y. D. Wang, X. Zhao, and L. Zuo
Grain Boundary Misorientation and CSL in Magnetically Annealed Fe-0.75%Si 405
C.M.B. Bacaltchuk, G.A. Castello-Branco, and H. Garmestani
The Effect of Ultra-High Magnetic Fields on Grain Growth and Recrystallization in Metals 413
A.D. Sheikh-Ali and H. Garmestani
New Approach to Texturing and Grain Boundary Engineering by Magnetic Field Application 421
Tadao Watanabe, Sadahiro Tsurekawa, Yudong Zhang, Xiang Zhao, Liang Zuo, and Claude Esling
Effects of Magnetic Field Direction on Texture Evolution in a Cold-Rolled IF Steel Sheet during High Magnetic Field Annealing 435
Yan Wu, Changshu He, Xiang Zhao, and Liang Zuo
Hexagonal Metals
Electrochemical Behavior of (001), (100) and (110) Ti Single Crystals under Simulated Body Fluid Condition 443
M. Azzi, S. Faghihi, M. Tabrizian, and J. A. Szpunar
Identification and Rationalization of Secondary Twin Variants in a Magnesium Alloy 451
M. R. Barnett and P. Cizek
Textures in HCP Titanium and Zirconium: Influence of Twinning 461
Nathalie Bozzolo and Francis Wagner
Texture and Microstructure Evolution during Asymmetric Rolling of Mg Alloys 473
Jaehyung Cho, Hyung-Wuk Kim, and Suk-Bong Kang
Prediction of Anisotropic Properties in Mg Alloy Sheets Using the Crystal Plasticity Finite Element Method 483
S.-H. Choi, J.K. Choi, H.W. Lee, and D.H. Kim
Strain Hardening Behaviour of an Initially Textured TI6AL4V Titanium Alloy as a Function of Strain Rate and Compression Direction 491
Frederik Coghe, Luc Rabet, and Paul Van Houtte
Texture Evolution during the Static Recrystallization of Three Binary Mg-Y Alloys 501
R. Cottam, J. Robson, G. Lorimer, and B. Davis
Grain Size and Orientation Distribution Function of High Purity á-Titanium 509
Bradley S. Fromm, Brent L. Adams, Sadegh Ahmadi, and Marko Knezevic
Textures in Titanium Alloys - An Industrial Perspective on Deformation, Transformation and Properties 521
David Rugg, David Furrer, and Nigel Brewitt
Annealing Related Microstructural Developments in a Two-Phase ZR-2.5 Nb Alloy 533
V.D. Hiwarkar, S.K. Sahoo, I. Samajdar, K. Narasimhan, Ê. V. Mani krishna, G.K. Dey, D. Srivastav, R. Tiwari, and S. Banarjee
Texture Aspects of Delayed Hydride Cracking in Products from Zr-Based Alloys 539
Margarita Isaenkova and Yuriy Perlovich
Effect of Twinning on the Strain Hardening Behaviors of Two Mg Alloys Deformed Along Four Different Strain Paths 547
L. Jiang and J.J. Jonas
EBSD Study of Annealing Rolled Zirconium 555
L. Jiang, M.T. Pérez-Prad, O.A. Ruan, and M.E. Kassner
Texture Evolution during Multi-Pass Equal Channel Angular Extrusion of Beryllium 563
Saiyi Li, David J. Alexander, Irene J. Beyerlein, and Donald W. Brown
A Mechanism of Determining the Formability of AZ31 near Room Temperature 571
Hualong Li, Emilie Hsu, and Jerzy Szpunar
An EBSD Study of the Misorientations Related to Dynamic Recrystallization in Mg AM30 Deformed At High Temperatures 577
Etienne Martin, Stéphane Godet, Lan Jiang, Abdelbaset Elwazri, Pascal J. Jacques, and John J. Jonas
Texture Evolution in Boron Modified Ti-6AI-4V Alloy 585
Shibayan Roy, Nilesh Gurao, Satyam Suwas, S. Tamirisakandala, R. Srinivasan, and D.B. Miracle
Heterogeneous Deformation in Single-Phase Zircaloy 2 593
S. Ê. Sahoo, V. D. Hiwarkar, I. Samajdar, P. Pant, D. Srivastav, R. Tewari, G. K. Dey and S. Banerjee
Texture of Magnesium Alloy Sheets Heavily Rolled by High Speed Warm Rolling 601
Tetsuo Sakai, Satoshi Minamiguchi, Hiroaki Koh, and Hiroshi Utsunomiya
Microstructure and Texture Gradient in Titanium Severely Strained by Friction Roll Processing and Subsequent Annealing 609
Meiqin Shi, Tomohiro Umetsu, Yoshimasa Takayama, Hajime Kato, and Hideo Watanabe
Evolution of Transformation Texture in a Metastable ß-Titanium Alloy 617
Satyam Suwas, Nilesh P. Gurao, Ashkar Ali
Dislocations in Textured Mg-4.5%AI-1 %Zn Alloy: TEM and Statistical Studies 629
V.N. Timofeev, V.N. Serebryany, and Yu A. Zaliznyak
Microstructure and Micro-Texture Evolution of Compression Twins in Magnesium 637
P. Yang, L. Meng, ×. Li, W. Mao, and L. Chen
Texture In Materials Design
Accessing the Texture Hull and Properties Closure by Rotation and Lamination: Results in the Primitive Basis of Dilation Functions 647
Brent L. Adams and David T. Fullwood
Correlation Relationship between Yield Strength and the Elastic Compliance for the Polycrystalline Nickel 201 657
Sadegh Ahmadi, Brent L. Adams, David T. Fullwood, and Bradley S. Fromm
Modeling Rolling Texture of Twinned Cu Single Crystals 665
Khaled Al-Fadhalah, Armand Beaudoin, and Marek Niewczas
Multiscale Modeling of Equal Channel Angular Extruded Aluminum with Strain Gradient Crystal Plasticity and Phenomenological Models 671
L. Duchêne, M.G.D. Geers, W.A.M. Brekelmans, E. Chen, B. Verlinden, and A.M. Habraken
Effect of Deformation Constraints on the Texture Formation in Al-5mass%Mg Solid Solution at High Temperatures 679
Kazuto Okayasu, Masayuki Sakakibara, and Hiroshi Fukutomi
Spectral Methods in the Statistical Description and Design of Microstructure 687
D.T. Fullwood, B.L. Adams, K.A. Stevens, S.R. Niezgoda, and S.R. Kalidindi
A Comparison of Deformation Textures and Mechanical Properties Predicted by Different Crystal Plasticity Codes 701
Craig S. Hartley, Paul R. Dawson, Donald E. Boyce, Surya R. Kalidindi, Marko Knezevic, Carlos Tomé, Ricardo Lebensohn, S. Lee Semiatin, Todd J. Turner, and Ayman A. Salem
Simulation of Texture Development in Pure Aluminum Deformed by Equal Channel Angular Pressing 713
Majid Hoseini, Mahmood Meratian, Hualong Li, and Jerzy Szpunar
Plastic Heterogeneity Due to Grain Boundaries and Its Influence on Global Deformation Textures 721
Anand Ê Kanjarla, Paul Van Houtte, and Laurent Delannay
On the Correlation of Surface Texture and Strain Induced Surface Roughness in AA6XXX Aluminum Sheet 731
S. Küsters, M. Seefeldt, and P. Van Houtte
The Variation Range for the Results of FCC Texture Simulations Based on {111 } Slip 743
Torben Letters
Development of Low Magnetism and Strongly Cube-Textured Composite Ni-7%W/Ni-10%W Substrate for Coated Superconductor 751
Dan-min Liu, Fei Hao, Jiu-xing Zhang, Yan-cao Hu, Mei-ling Zhou, and Wei-peng Liu
Two-Point Orientation Coherence Functions: An Orthonormal Series Solution 759
Peter R. Morris
The Influence of Shear Bands on Microtexture Evolution in Polycrystalline Copper 765
H. Paul and J.H. Driver
Influence of Dislocation Stress on the Corrosion Behavior of (111) and (123) Surface Plane of Aluminum Single Crystal 775
Dashi Pei, Weimin Mao, and Huiping Feng
Texture Randomization by Intense Shearing in Layered AI and AI (0.3%Sc) ARB-Processed Sheet 783
M.Z. Quadir, O. Al-Buhamad, L. Bassman, and M. Ferry
Texture Development of Molybdenum Sheets during Last Step of Heat Treatment 791
C.-G. Oerrel, I. Hünsche, W. Skrotzki, A. Lorich, and W. Knabl
Solute, Superplasticity and Texture Change in Aluminium Alloys 801
K. Sotoudeh, P.S. Bate, and F.J. Humphreys
Texture-Based Plastic Potentials in Stress Space 809
Albert Van Bael, Sampath K. Yerra, Paul Van Houtte, and Albert Van Bael
Hierarchical Multi-Level Modelling of Plastic Anisotropy using Convex Plastic Potentials 817
Paul Van Houtte, Sampath K. Yerra, and Albert Van Bael
Author Index 827
Applications of Texture Analysis TOC:
Preface xv
Acknowledgments xvii
THIN FILMS (MICROELECTRONICS, HTSC)
The Texture of Thin Nisi Films and Its Effect on Agglomeration 3
K. De Keyser, C. Detavernier, R. L. Van Meirhaeghe, J. Jordan-Sweet, and C. Lavoie
Epitaxial Substrates from Ni-Based Ternary Alloys With Cr and W 11
D.P. Rodionov, I.V. Gervasyeva, Yu.V. Khlebnikova, and V.A. Kazantsev
Cube Texture Formation in Ni-Pd and Ni-Pd-W Alloys For HTS Tapes 23
I.V. Gervasyeva, D.P. Rodionov, Yu.V. Khlebnikova, G.A. Dosovitskii, and A.R. Kaul
Texture of Rapidly Solidified Cu Thin Films Studied by SEM EBSD and TEM 35
R. Zhong, A. Kulovits, J.M.K. Wiezorek, and J.P. Leonard
Control of Texture in Polycrystalline Thin Films Used as Data Storage Media 47
David E. Laughlin, Hua Yuan, En Yang, and Chun Wang
Influences of Processing Parameters on Microstructures and Microtextures of Au Flip Chip Bonds During Microelectronics Packaging 57
P Yang, C-M Li, D-M Liu, M Hung, M Li, and W-M Mao
TEXTURE AT NON-AMBIENT CONDITIONS
In Situ Observation of Texture Evolution in Ti-10-2-3 65
Seerna L. Raghunathan, Richard Dashwood, Martin Jackson, Sven Vogel, and David Dye
Study of Texture Evolution at High Strain Rates in FCC Materials 73
Nilesh Gurao, Satyam Suwas, and Rajeev Kapoor
Texture and Microstructure Development in Copper after Cryogenic Rolling and Heat Treatment 83
A. Haldar, D. Das, and P.P. Chattopadhyay
In-Situ EBSD Study of the a-y-a Phase Transformation in a Microalloyed Steel 95
Lischewski, D. M. Kirch, A. Ziemons, and G. Gottstein
Texture Changes during Phase Transformations Studied In Situ With Neutron Diffraction 103
Hans-Rudolf Wenk
NOVEL TEXTURE MEASUREMENT TECHNIQUES INCLUDING 3D
Three-Dimensional FIB-OIM of Ceramic Materials 117
Shen J. Dillon and Gregory S. Rohrer
Comparison of X-Ray and EBSD Textures for Back-Annealed AI-Mg Alloys 125
0. Engler
A New Method for Quantification of Texture Uniformity of Plate 135
Peter Jepson and Robert Bailey
Separating Coincident Electron Backscatter Diffraction Patterns Near Interfaces 147
Josh Kacher, Brent L. Adarns, David Fullwood, and Colin Landon
Rapid Texture Determination Based on Two Dimensional X Ray Detector 155
Weimin Mao
Semiautomatic Determination of Orientations and Elastic Strain from Kossel Microdiffraction 163
Adam Morawiec, Raphael Pesci, and Jean-Sebastien Lecomte
Statistically Reliable EBSD Analysis Method of Grain Boundary Characterization 171
D.H. Kim, J.Y.Kang, D.I. Kim, E.K. Her, S.J. Kim, H.N. Han, K.H. Oh, and H.C. Lee
3D Microstructures and Textures of a Plane Strain Compressed (1 10}4 12> AI-0.3% Mn Single Crystal 181
H. Paul, J.H. Driver, and CI. Maurice
Three Laws of Substructure Anisotropy of Textured Metal Materials, Revealed by X-Ray Method of Generalized Pole Figures 189
Yuriy Perlovich, Margarita Isaenkova, and Vladimir Fesenko
3D-Microstructural and Texture Characterization in Different Length Scales 197
Roumen Petrov and Patricia Gobernado Hernandez, Orlando Leon Garcia, Hemant Sharma, and Leo Kestens
Local Crystal Rotations of Bulk Grains by High-Resolution EBSD during Hot PSC of AI-0.1 % Mn Polycrystals 205
Romain Quey, David Piot, and Julian Driver
Grain Boundary Orientations in a Fe-Mn-Cu Polycrystalline Alloy 213
M. Takashima and P. Wynblatt
Development of a TEM-Based Orientation Microscopy System 221
S. Zaefferer and G. Wu
COMPLEX OXIDES AND OTHER COMPOUNDS
Domain Control Effect on Voltage-Strain in BaTi03 Single Crystal 231
Yoshio Akimune, Kazuo Matsuo, Ryutaro Oishi, and Akira Okada
Tentative Simulation of Crystal Rotation for NaCl Structures 239
Hiroaki Masui
INTERFACE TEXTURES
Grain Boundary Patterns in Dynamically Recrystallized Quartz Aggregates 251
Cristiane Castro and Leonardo Lagoeiro
The Correlation between Grain Boundary Character and lntergranular Corrosion Susceptibility of
2124 Aluminum Alloy 261
L. H. Chan, H. Weiland, S. Cheong, G.S. Rohrer, and AD. Rollett
Rodrigues-Frank Spaces for Misorientations and Orientation Relationships between Crystals of Any Two Crystallographic Point Groups 269
Youliang He and John J. Jonas
Origins of Texture Memory in Steels 281
Bevis Hutchinson and Leo A.I. Kestens
A Grain Boundary Analysis of Cemented Tungsten Carbides using OIM 291
Vineet Kumar, Zhigang Zak Fang, S.I. Wright and M.M. Nowell
The Effect of Grain and Phase Boundary Misorientation on Nucleation during Solid-state Phase Transformations in a Co-l5Fe Alloy 305
H. Landheer, S.E. Offerman, and L.A.I. Kestens, T. Takeuchi, M. Enomoto, and Y. Adachi
Microstructural Modification in a 150-1 5Ni-2.2 Mo-Ti Modified Austenitic Stainless Steel through Twin Induced Grain Boundary Engineering 313
Sumantra Mandal, P.V. Sivaprasad, and V. Subramanya Sarrna
Effect of Strain Path and Annealing on Development of Resistance to lntergranular Degradation in Austenitic Stainless Steels 323
V. Randle, R. Jones, T.J. Marrow, and D. Engelberg
Evolution of the Grain Boundary Character Distribution in Strontium Titanate during Grain Growth 335
Herbert M. Miller and Gregory S. Rohrer
A Model for the Origin of Anisotropic Grain Boundary Character Distributions in Polycrystalline Materials 343
Gregory S. Rohrer, Jason Gruber, and Anthony D. Rollett
Nucleation of the Primary A1 Phase on TiA13 during Solidification of a Hot-Dip Zn-1 1% A1-3%Mg-On2%SCi oating on Steel Sheet 355
Kazuhiko Honda, Kohsaku Ushioda, and Wataru Yamada
RECRYSTALLIZATION TEXTURE: RETROSPECTIVE VERSUS CURRENT PROBLEMS
Textural lnhomogeneity Effect during the Monte Carlo Simulation of the Abnormal Goss Grain Growth in Fe-3%Si Steel Grade HiB 365
T. Baudin, R. Penelle, and D. Ceccaldi
Avoiding Roping and Ridging in AA6XXX Sheets: Characterizing the Initial State 373
T.A. Bennett, R.H. Petrov, and L.A.I. Kestens
Development of Cube Texture in Cold-Rolled and Annealed Multilayer Tapes for Coated Superconductor Applications 381
P.P. Bhattacharjee and R.K. Ray
Effects of Elastic Modulus on Deformation and Recrystallization of High Purity Nb 391
D. Baars, H. Jiang, T.R. Bieler, A. Zamiri, F. Pourboghrat, and C. Compton
Through-Process Texture Modeling of AA6016 from Hot Rolling to Final Annealing 399
C. Bollmann and G. Gottstein
Cube Texture Due to Dynamic Recrystallization in Pb and Pb-62%Sn Alloys under Equal Chanel Angular Extrusion Processing 409
R.E. Bolmaro, V.L. Sordi, M. Ferrante, WeiMin Gan, and H.-G. Brokmeier
Annealing Texture Evolution 421
I.L. Dillamore
On the Stability of Recrystallization Textures in Low Alloyed Zirconium Sheets 429
FranCois Gerspach, Nathalie Bozzolo, and Francis Wagner
An Analysis of the Texture and Mean Orientation of Aluminium Alloy AA5052 Subjected to Forward and Reverse Hot Torsion and Subsequent Annealing 437
0. Hernandez-Silva, B.P. Wynne, and W. M. Rainforth
Evolution of { l l l } Recrystallization Texture in Al-Mg-Si Alloy Sheets Processed by Symmetric and Asymmetric Combination Rolling 445
Hirofumi Inoue, Satoshi Kobayashi, Masayuki Hori, Toshio Komatsubara, and Takayuki Takasugi
Effect of External Constraint and Deviation from Ideal Orientation on Development of Rolling Texture in Pure Aluminum Single Crystal Having {loo} Orientation 453
Keizo Kashihara and Hirosuke lnagaki
Nucleation and Growth of New Grains in Deformed Quartz Single Crystals 461
Leonardo Lagoeiro and Paola Barbosa
Rolling and Annealing Textures of Silver Sheets 469
Dong Nyung Lee, Heung Nam Han, and Se-Jong Kim
Function of Layer Thickness on the Microstructural Evolution in Copper of Annealed Roll-Bonded CuNb Composites 481
S.C.V. Lim and A.D. Rollett
Influence of Taylor Factor M on Recrystallization of The Cube and Cube-Family Grains in FCC Metal 489
Hiroaki Masui
Multi-Cycle Pinch Welding of 304L Tubes: lnhomogeneities in Deformation and Recrystallization Textures and Microstructures 499
C.T. Necker, A.N. Marchi, and M.G. Smith
Effect of Mg Concentration on Texture Formation in AI-Mg Alloys during High Temperature Compression 507
Kazuto Okayasu, Hiroki Takekoshi, Masayuki Sakakibara, and Hiroshi Fukutomi
Ultra-Fine Grain Austenitic Stainless Steels: Influence of Texture during Recrystallization 515
Angeline Poulon-Quintin, Stephanie Brochet, Jean-Bernard Vogt, Jean-Christophe Glez, and Jean-Denis Mithieux
Patterns of Deformation and Associated Recrystallization in Warm/Hot Deformed AA6022 523
S. Raveendra, S. Mishra, H. Weiland, and I. Samajdar
Studies on Texture and Microstructure of Cryorolled and Annealed Cu-5%AI, Cu-5%Zn Alloys 529
V.L. Niranjani, Nilesh Gurao, U. Wendt, S. Suwas, and V. Subramanya Sarma
Modeling of Texture Development during Tandem Hot Rolling of AA3 1 03 537
C. Schafer, V. Mohles, and G. Gottstein
Texture Modification in Asymmetrically Rolled Aluminum Sheets 547
Jurij Sidor, Roumen Petrov, Alexis Miroux, and Leo Kestens
In-Situ SEM/EBSP Analysis during Annealing in AI-Mg Alloys 555
Yoshimasa Takayama, Kazuhiro Morita, Hajime Kato, and Yoshimasa Ookubo
Oriented Grain Growth and the Effect of In-Situ Annealing on Texture in AlMn Alloys 561
Caterina E. Tommaseo and H. Klein
Subgrain Coarsening of Hot-Rolled AA5005 Aluminum Alloy: A Comparison between EBSD Observations and Monte Carlo 569
Shengyu Wang, Mohammed H. Alvi, and Anthony D. Rollett
Influence of Low Angle Grain Boundaries on Recrystallization 577
Myrjam Winning and Dierk Raabe
BIOMATERIALS
Comparison of Calcite Crystallographic Texture in the Shells of the Rhynchonelliform Brachiopod, Terebratulina Retusa and the Bivalve Mollusc, Mytilus Edulis 587
M.Cusack, A. Perez-Huerta, P. Dalbeck, P. Chung, and M.R. Lee
Wear Resistance and Texture Evolution of Ultra High Molecular Weight Polyethylenes during Uniaxial Compression 595
D.S. Li, H. Garmestani, S.C. Davis, L.K. Moss, A.K. Siddiqi, J.B. Guthrie, N. Johansen, and L. Matrisciano
Texture and Microstructure of Modern Rhynchonellide Brachiopod Shells-An Ontogenetic Study 605
E. Griesshaber, R.D. Neuser, U. Brand, and W.W. Schmahl
Peering Into the Eyes of Trilobites using EBSD 619
C. Torney, M.R. Lee, and A.W. Owen
Texture and Anisotropy of MP35N Wire for Conduct Leads 627
Bernard Q. Li and Tom Steigauf
Crystallographic Textures from the Exoskeleton of the Lobster Hornarus Arnericanus and Calculation of the Mechanical Properties of the Calcite Phase 637
L. Raue, H. Klein, D. Raabe, and H. Fabritius
TEXTURE EFFECTS ON DAMAGE ACCUMULATION
Experimental Characterization of the Effect of Crystallography on the Three Dimensional Nucleation and Growth of Fatigue Cracks in Metals 657
J-Y. Buffiere, E. Ferrie, H. Proudhon and W. Ludwig
Reversible Texture Transition during Accumulative Roll Bonding 669
Naoya Kamikawa, Xiaoxu Huang, Grethe Winther, Nobuhiro Tsuji, and Niels Hansen
Evolution of Grain Boundary Microstructures in Molybdenum by Thermomechanical Processing from Single Crystals 681
Shigeaki Kobayashi, Sadahiro Tsurekawa, and Tadao Watanabe
Local Characterization of Void Initiation on IF Steel by FIB-EBSD Technique 693
Orlando Leon-Garcia, Roumen Petrov, and Leo Kestens
Experimental and Simulation Study on Texture and Bendability of AA5XXX Aluminum Alloys 701
Y. Liu, Z. Long, X. Y. Wen, S. Ningileri, and S. K Das
Some Aspects on Grain Growth in ECAP Deformed and Heat Treated Aluminum 1.2% Hafnium Alloy 709
0. Al-Buhamad, M.Z. Quadir, and M. Ferry
Kinetic Measurements of Texture and Microstructural Evolution using Orientation Distribution Function and Residual Stress Relaxation 717
S. Saimoto, J. Cooley, and C. Gabryel
Texture and Micro-Hardness Evolution of Submicrograined Copper 725
X. S. Yao, Y. D. Liu, Q. W. Jiang, X. Zhao, and L. Zuo
DIGITAL MICROSTRUCTURES
A Model of Plastic Spin Taking into Account Grain Interaction During Rolling 735
A. Fourty, J.W. Signorelli, and R.E. Bolmaro
CPFEM Investigation of the Effect of Grain Shape on the Planar Anisotropy and the Shear Banding of Textured Metal Sheets 745
Laurent Delannay, Maxime A. Melchior, Anand K. Kanjarla, Paul Van Houtte, and Javier W. Signorelli
Modelling of Primary Recrystallization using Digital Microstructures 757
R.E. Loge, M. Bernacki, H. Resk, H. Digonnet, Y. Chastel, and T. Coupez
Two-Phase Microstructure Generation in 3D Based on 2D Sections of a Nickel Alloy 771
C.G. Roberts, S.L. Semiatin, and A.D. Rollett
Evolution of Local Damage Variable and Its Rate of Strain-Softening Material in Tension Based on Nonlocal Theory 779
X. B. Wang
Grain Interaction and Related Elastic Fields at Triple Junction in Low Deformed IF Steel: Micromechanical Model and Reconstruction from EBSD Orientation Data 787
A.A. Zisman, V.V. Rybin, M. Seefeldt, S. Van Boxel, and P. Van Houtte
Gradient Matrix Method to Image Crystal Curvature with Discrete Orientation Data: Case Study of Triple Junction in Deformed IF Steel 803
A.A. Zisman, M. Seefeldt, S. Van Boxel, and P. Van Houtte
Author Index 815
