Pawar Optimization and Analysis of Surface Roughness in CNC Turning Inconel 718 using Taguchi’s and ANOVA analysis

1. Auflage 2016
ISBN: 978-3-668-15526-8
Verlag: GRIN Publishing
Format: PDF
Kopierschutz: 0 - No protection

E-Book, Englisch, 8 Seiten

Research Paper (postgraduate) from the year 2015 in the subject Materials Science, , course: Mechanical, language: English, abstract: The purport of this experimentation was to fixate on the analysis of optimum cutting conditions to get the minimum surface roughness in CNC turning of Inconel 718 alloy steel by Taguchi method. The nine experiments were designed by utilizing Minitab17 software. In this research work all the tribulations were conducted at a constant spindle speed (2800 RPM) and in a dry environment. The results were analyzed utilizing analysis of variance (ANOVA) method. Taguchi method has shown that cutting speed has a consequential role to play in engendering lower surface roughness followed by aliment rate. The vibrations of the implement wear, implement life are the other factors which may contribute poor surface roughness to the results and such factors ignored in analyses. The results obtained by this research work may be subsidiary for another researcher for further study for other replications such as implement vibration, implement wear, implement life, cutting forces etc.

Dr. Krupal Prabhakar Pawar is working as an Assistant Professor in Department of Mechanical Engineering ,Sandip University,Nashik. He is completed his Ph.D. from Shri Satya Sai University of Technology and Medical Sciences, Sehore, Madhya Pradesh (M.P) in 2019.He has completed Master of Engineering (ME) in Mechanical Engineering (Advance Manufacturing and Mechanical Systems Design) from Shri Gajanan Maharaj College of Engineering, Shegaon, Dist.-Buldhana in 2015.He has completed Bachelor of Engineering (BE) from R.C.Patel Institute of Technology, Shirpur, Dist.-Dhule in 2010. He has two years manufacturing industry experience.He has published a number of papers in national and international journals.He is a member of various professional societies.

Autoren/Hrsg.

Pawar, Krupal

Über Autor(innen)

Pawar, Krupal
Author is working as Assistant Professor in Department of Mechanical Engineering, Sharadchandra Pawar College of Engineering ,Pune. Author has two years industrial experience and three years teaching experience. he is pursuing Ph.D in Mechanical Engineering from SSUTMS,Sehore,M.P. He has completed Master of Engineering from Shri Sant Gajanan Maharaj College of Engineering,Shegaon .He has completed MBA(Production Management ) from Indian Management School and Research Centre,Mumbai.