Systematic Design of Sigma-Delta Analog-to-Digital Converters

1. Auflage. Softcover version of original hardcover Auflage 2004
ISBN: 978-1-4419-5456-5
Verlag: Springer US

Buch, Englisch, 196 Seiten, Previously published in hardcover, Format (B × H): 170 mm x 244 mm, Gewicht: 375 g

Reihe: The Springer International Series in Engineering and Computer Science

Systematic Design of Sigma-Delta Analog-to-Digital Converters describes the issues related to the sigma-delta analog-to-digital converters (ADCs) design in a systematic manner: from the top level of abstraction represented by the filters defining signal and noise transfer functions (STF, NTF), passing through the architecture level where topology-related performance is calculated and simulated, and finally down to parameters of circuit elements like resistors, capacitors, and amplifier transconductances used in individual integrators. The systematic approach allows the evaluation of different loop filters (order, aggressiveness, discrete-time or continuous-time implementation) with quantizers varying in resolution. Topologies explored range from simple single loops to multiple cascaded loops with complex structures including more feedbacks and feedforwards. For differential circuits, with switched-capacitor integrators for discrete-time (DT) loop filters and active-RC for continuous-time (CT) ones, the passive integrator components are calculated and the power consumption is estimated, based on top-level requirements like harmonic distortion and noise budget.
This unified, systematic approach to choosing the best sigma-delta ADC implementation for a given design target yields an interesting solution for a high-resolution, broadband (DSL-like) ADC operated at low oversampling ratio, which is detailed down to transistor-level schematics.
The target audience of Systematic Design of Sigma-Delta Analog-to-Digital Converters are engineers designing sigma-delta ADCs and/or switched-capacitor and continuous-time filters, both beginners and experienced. It is also intended for students/academics involved in sigma-delta and analog CAD research.

Zielgruppe

Research

Autoren/Hrsg.

Huijsing, Johan

Bajdechi, Ovidiu

Fachgebiete

• Technische Wissenschaften Elektronik | Nachrichtentechnik Elektronik Bauelemente, Schaltkreise

Inhaltsverzeichnis

1 Introduction.- 1.1 Analog-to-Digital Conversion. From Nyquist to Sigma-Delta.- 1.2 Motivation.- 1.3 Book Organization.- 2 Architecture-Level Analysis of Sigma-Delta ADCs.- 2.1 Principle and Operation.- 2.2 Sigma-Delta ADCs with Discrete-Time Loop Filters.- 2.3 Sigma-Delta ADCs with Continuous-Time Loop Filters.- 3 Discrete-Time Circuit Design.- 3.1 Switched-Capacitor Integrators.- 3.2 Switched-Capacitor Amplifiers.- 3.3 Quantizer.- 3.4 Multibit, SC Digital-to-Analog Converters.- 4 Continuous-Time Circuit Design.- 4.1 Active RC Integrator.- 4.2 Quantizer.- 4.3 Digital-to-Analog Converters.- 5 Computer Aided Design of Sigma-Delta ADCs.- 5.1 Filter-Level Design.- 5.2 Architecture-Level Design.- 5.3 Design Examples.- 6 Sigma-Delta ADC for Audio Applications.- 6.1 The Electret Microphone.- 6.2 System Design.- 6.3 Sigma-Delta ADC Design.- 6.4 Linearity Analysis.- 6.5 Experimental Results.- 7 Broadband, High Dynamic Range Sigma-Delta ADC.- 7.1 Project Specifications.- 7.2 CAD-Assisted Design Optimization.- 7.3 Design of the 16-bit CT Integrator.- 7.4 Design of the 14-bit SC Integrator.- 7.5 Higher Order Integrators.- 7.6 Feed-Forwards Adder and 31-Levels Quantizer.- 7.7 Calibration of Current-Mode CT DAC.- 7.8 Transistor-Level Simulation Results.- Summary.- References.