Goodship / Stevels / Huisman Waste Electrical and Electronic Equipment (WEEE) Handbook

1. Auflage 2012
ISBN: 978-0-85709-633-3
Verlag: Elsevier Science & Techn.
Format: EPUB
Kopierschutz: 6 - ePub Watermark

E-Book, Englisch, 760 Seiten

Reihe: Woodhead Publishing Series in Electronic and Optical Materials

Electrical and electronic waste is a growing problem as volumes are increasing fast. Rapid product innovation and replacement, especially in information and communication technologies (ICT), combined with the migration from analog to digital technologies and to flat-screen televisions and monitors has resulted in some electronic products quickly reaching the end of their life. The EU directive on waste electrical and electronic equipment (WEEE) aims to minimise WEEE by putting organizational and financial responsibility on producers and distributors for collection, treatment, recycling and recovery of WEEE. Therefore all stakeholders need to be well-informed about their WEEE responsibilities and options. While focussing on the EU, this book draws lessons for policy and practice from all over the world.Part one introduces the reader to legislation and initiatives to manage WEEE. Part two discusses technologies for the refurbishment, treatment and recycling of waste electronics. Part three focuses on electronic products that present particular challenges for recyclers. Part four explores sustainable design of electronics and supply chains. Part five discusses national and regional WEEE management schemes and part six looks at corporate WEEE management strategies.With an authoritative collection of chapters from an international team of authors, Waste electrical and electronic equipment (WEEE) handbook is designed to be used as a reference by policy-makers, producers and treatment operators in both the developed and developing world. - Draws lessons for waste electrical and electronic equipment (WEEE) policy and practice from around the world - Discusses legislation and initiatives to manage WEEE, including global e-waste initiatives, EU legislation relating to electronic waste, and eco-efficiency evaluation of WEEE take-back systems - Sections cover technologies for refurbishment, treatment and recycling of waste, sustainable design of electronics and supply chains, national and regional waste management schemes, and corporate WEEE management strategies

Autoren/Hrsg.

Goodship, Vannessa

Stevels, Ab

Huisman, Jaco

Leseproben

Contributor contact details
(* = main contact) Editor Dr Vannessa Goodship,     WMG, University of Warwick, Coventry, CV4 7AL, UK. E-mail address: [e-mail] Editor and Chapters 3, 29 and 30 Prof. Ab L.N. Stevels,     Design for Sustainability Lab, Delft University of Technology, p.a. Herinkhave 3, 5655 JL, Eindhoven, The Netherlands. E-mail address: [e-mail] Chapter 1 Dr Ruediger Kuehr,     United Nations University, Institute for Sustainability and Peace, Operating Unit SCYCLE, Hermann-Ehlers-Str. 10, 53113 Bonn, Germany. E-mail address: [e-mail] Chapter 2 Dr Rebecca Stewart,     c/o Vannessa Goodship, WMG, University of Warwick, Coventry, CV4 7AL, UK. E-mail address: [e-mail] Chapter 4 Pascal Leroy,     Secretary General, WEEE Forum aisbl, Diamant conference and business centre, Auguste Reyerslaan 80, 1030 Brussels, Belgium. E-mail address: [e-mail] Chapter 5 Heinz W. Böni,     Head Technical Auditing and Monitoring Unit Swico Recycling, Technology and Society Lab, Swiss Federal Laboratories for Materials Science and Technology (EMPA), Lerchenfeldstrasse 5, CH-9014 St. Gallen, Switzerland. E-mail address: [e-mail] Chapter 6 Dr Jaco Huisman [e-mail] Delft University of Technology, Design Engineering, Design for Sustainability program, Landbergstraat 15, 2628 CE Delft, The Netherlands United Nations University, Institute for Sustainability and Peace, Operating Unit SCYCLE, Hermann-Ehlers-Str. 10, 53113 Bonn, Germany Chapter 7 Prof. Martin Goosey,     Industrial Director – Innovative Electronics Manufacturing Research Centre, The Wolfson School of Mechanical and Manufacturing Engineering, Loughborough University, Ashby Road, Loughborough, LE11 3TU, UK. E-mail address: [e-mail] Chapter 8 Dr Winifred L. Ijomah*,     DMEM – Design, Manufacture & Engineering Management Department, University of Strathclyde, 75 Montrose Street, Glasgow, G1 1XJ, UK. E-mail address: [e-mail] M. Danis,     Head of Fujitsu Remarketing, Fujitsu Technology Solutions, UK, Lovelace Road, Bracknell, RG12 8SN, UK. E-mail address: [e-mail] Chapter 9 Dr Antoinette van Schaik*,     MARAS – Material Recycling and Sustainability, Rijsbes 46, 2498 AS, The Hague, The Netherlands. E-mail address: [e-mail] Prof. Markus A. Reuter,     Director – Technology Management, Outotec Oyj, Riihitontuntie 7 D, PO Box 86, FI-02200 Espoo, Finland. E-mail address: [e-mail] Chapter 10 Kylash Makenji*,     WMG, University of Warwick, Gibbet Hill Road, Coventry, CV4 7AL, UK. E-mail address: [e-mail] Dr Mark Savage,     WMG, University of Warwick, Gibbet Hill Road, Coventry, CV4 7AL, UK Chapter 11 Prof. Maria Paola Luda,     Department of Chemistry IFM, University of Turin, Via P. Giuria 7, 10125 Torino, Italy. E-mail address: [e-mail] Chapter 12 Prof. Arnold Tukker [e-mail] Business line manager, Societal Innovation and Economy, TNO, Delft, The Netherlands Department of Product Design, Norwegian University of Science and Technology, Trondheim, Norway Chapter 13 Prof. Jinhui Li* and , DrXianlai Zeng,     Sino-Italian Ecological Energy Efficient Building, Tsinghua University, Beijing, P. R. China, 100084. E-mail address: [e-mail] Chapter 14 Dr Karl S. Williams* and , DrTimothy McDonnell,     Centre for Waste Management, University of Central Lancashire, Preston, PR1 2HE, UK. E-mail address: [e-mail] Chapter 15 Christian Keri,     Reclay Österreich GmbH, Mariahilfer Straße 37–39, 1060 Vienna, Austria. E-mail address: [e-mail] Chapter 16 Marika Keskinen, MSc.,     Department of Electronics, Tampere University of Technology, PL 692, 33101 Tampere, Finland. E-mail address: [e-mail] Chapter 17 Dr Denise Crocce Romano Espinosa*,     Department of Metallurgical and Materials Engineering, University of São Paulo, Av. Prof. Mello Moraes, 2463, 05508–030, São Paulo SP, Brazil. E-mail address: [e-mail] Dr Marcelo Borges Mansur,     Department of Metallurgical and Materials Engineering, Federal University of Minas Gerais, Av. Antônio Carlos, 6627, Campus da Pampulha, 31270–901, Belo Horizonte, MG, Brazil. E-mail address: [e-mail] Chapter 18 Dr Nils F. Nissen,     Department Environmental and Reliability Engineering, Fraunhofer IZM, Gustav-Meyer-Allee 25, 13355 Berlin, Germany. E-mail address: [e-mail] Chapter 19 Prof. Ursula Tischner*,     ec[o]ncept, Agency for Sustainable Design, Alteburger Str. 32, D-50678, Cologne, Germany. E-mail address: [e-mail] Dr Maike Hora,     e-hoch-3, eco efficient engineering, Robert-Bosch-Str. 7, D-64293 Darmstadt, Germany. E-mail address: [e-mail] Chapter 20 Dr Otmar Deubzer [e-mail] United Nations University, Institute for Sustainability and Peace, Operation Unit SCYCLE, Hermann-Ehlers-Str. 10, 53113 Bonn, Germany Fraunhofer IZM, Gustav-Meyer-Allee 25, 13355 Berlin, Germany Chapter 21 Dr I.-Hsuan Hong*,     Institute of Industrial Engineering, National Taiwan University, No. 1 Sec. 4 Roosevelt Road, Taipei (10617), Taiwan. E-mail address: [e-mail] Dr Jane C. Ammons,     H. Milton Stewart School of Industrial and Systems Engineering, Georgia Institute of Technology, 765 Ferst Drive, N.W., Atlanta, GA 30332–0205, USA. E-mail address: [e-mail] Dr Matthew J. Realff,     School of Chemical and Biomolecular Engineering, Georgia Institute of Technology, 311 Ferst Drive, N.W., Atlanta, GA 30332–0100, USA. E-mail address: [e-mail] Chapter 22 Dr Elisabeth Román,     Department of Technology, Narvik University College, Lodve Langes gt. 2, PO Box 385, N-8505 Narvik, Norway. E-mail address: [e-mail] Chapter 23 Prof. Guangming Li,     College of Environmental Science and Engineering, Tongji University, 1239 Siping Road,...