Awang 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering

1. Auflage 2017
ISBN: 978-981-10-4232-4
Verlag: Springer Singapore
Format: PDF
Kopierschutz: 1 - PDF Watermark

E-Book, Englisch, 128 Seiten, eBook

Reihe: Lecture Notes in Mechanical Engineering

This volume presents selected papers from the 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering (ICMMPE 2016) which was held from 23rd to 24th November, 2016 in Kuala Lumpur, Malaysia.  The proceedings discuss genuine problems of joining technologies that are heart of manufacturing sectors.  It discusses the findings of experimental and numerical works from soldering, arc welding to solid state joining technology that faced by current industry.

Zielgruppe

Professional/practitioner

Autoren/Hrsg.

Awang, Mokhtar

Inhaltsverzeichnis

1;Contents;6
2;1 A Review of Friction Stir Welding Pin Profile;8
2.1;Abstract;8
2.2;1 Introduction;8
2.3;2 Experimental Studies on FSW Pin Profiles;10
2.4;3 Simulation on FSW Pin Profiles;15
2.5;4 Optimization on FSW Pin Profiles;17
2.6;5 Conclusion;18
2.7;Acknowledgements;18
2.8;Appendix 1: A Summary of Experimental Study on Different Pin Profiles;19
2.9;References;23
3;2 Friction Stir Welding of Polymers: An Overview;26
3.1;Abstract;26
3.2;1 Introduction;26
3.3;2 Friction Stir Weldability of Polymers;28
3.4;3 The Research Progress in Friction Stir Welding of Polymers;29
3.4.1;3.1 Optimum Welding Parameters for the FSW of Polymers;29
3.4.2;3.2 Role of Tool Design on FSW of Polymers;33
3.4.3;3.3 Effects of External Heat Induction;35
3.4.4;3.4 Submerged FSW of Polymers;36
3.4.5;3.5 Microstructure Evolution;36
3.4.6;3.6 Elimination of Root Defect in FSW of Polymers;37
3.4.7;3.7 Effects of Crystallinity on the Properties of Polymer;38
3.4.8;3.8 Material Flow During FSW Process;39
3.5;4 Conclusions;40
3.6;5 Recommendations;40
3.7;Acknowledgements;41
3.8;References;41
4;3 Variation of Tool Offsets and Its Influence on Mechanical Properties of Dissimilar Friction Stir Welding of Aluminum Alloy 6061 and S235JR Mild Steel by Conventional Belting Milling Machine;44
4.1;Abstract;44
4.2;1 Introduction;44
4.3;2 Experimental Procedure;46
4.4;3 Results;47
4.4.1;3.1 Effect of Tool Offset;47
4.4.1.1;3.1.1 Tool Offset +0.2 mm;47
4.4.1.2;3.1.2 Tool Offset 0 mm;48
4.4.1.3;3.1.3 Tool Offset ?0.2 mm;50
4.4.2;3.2 Microhardness;51
4.5;4 Conclusions;52
4.6;References;53
5;4 Fracture Behavior of Intermetallic Compound (IMC) of Solder Joints Based on Finite Elements’ Simulation Result;55
5.1;Abstract;55
5.2;1 Introduction;55
5.3;2 Methods;56
5.3.1;2.1 FE Solder Joint Modeling;57
5.4;3 Results and Discussion;59
5.4.1;3.1 Validation of FE Model with Brown & Srawley Equation;59
5.4.2;3.2 The Effect on Different Crack Length on Fracture Parameter;59
5.4.3;3.3 The Effect on Different IMC Thickness on Fracture Parameter;60
5.4.4;3.4 The Effect on Different Young’s Modulus on Fracture Parameter;61
5.5;4 Conclusions;62
5.6;Acknowledgements;62
5.7;References;62
6;5 Effect of Isothermal Aging on Mechanical Properties of Sn-3.0Ag-0.5Cu Solder Alloy with Porous Cu Interlayer Addition;64
6.1;Abstract;64
6.2;1 Introduction;64
6.3;2 Experimental Procedures;66
6.3.1;2.1 Material Selection and Sample Preparation;66
6.3.2;2.2 Isothermal Aging and Analysis Procedure;66
6.4;3 Results and Discussion;67
6.4.1;3.1 Effect of Porous Cu Interlayer on Joint Strength During Isothermal Aging Process;67
6.4.2;3.2 Fracture Surface Analysis;68
6.5;4 Conclusions;71
6.6;Acknowledgements;71
6.7;References;71
7;6 On Amorphous Phase Formation in Dissimilar Friction Stir Welding of Aluminum to Steel;73
7.1;Abstract;73
7.2;1 Introduction;74
7.2.1;1.1 Hybrid Structure;74
7.2.2;1.2 Friction Stir Welding;75
7.2.3;1.3 Amorphous Phase;75
7.3;2 Experimental Works;77
7.4;3 Results and Discussion;78
7.5;4 Conclusion;84
7.6;References;85
8;7 Influence of Loading Rate on Deformation Behaviour and Sealing Performance of Spiral Wound Gasket in Flange Joint;86
8.1;Abstract;86
8.2;1 Introduction;87
8.3;2 Experimental Procedure;88
8.4;3 Gasket Characteristics at Different Loading Rate;90
8.5;4 Flange Joint with Gasket;90
8.5.1;4.1 FE Model of Flange Joint;91
8.6;5 Gasket Behaviour;92
8.6.1;5.1 Gasket Contact Stress Distribution;93
8.6.2;5.2 Sealing Performance;94
8.7;6 Conclusions;95
8.8;References;96
9;8 Effect of Bevel Angles on Tensile Strength of SS304 Steel Weld Joints;97
9.1;Abstract;97
9.2;1 Introduction;97
9.3;2 Experimental Procedure;100
9.3.1;2.1 Modelling;100
9.3.2;2.2 Experiment Methodology;101
9.4;3 Results and Discussion;104
9.4.1;3.1 Results;104
9.4.2;3.2 Discussion;105
9.4.2.1;3.2.1 Yield Stress;106
9.5;4 Conclusions;107
9.6;Acknowledgements;108
9.7;References;108
10;9 Developing a Finite Element Model for Thermal Analysis of Friction Stir Welding by Calculating Temperature Dependent Friction Coefficient;109
10.1;Abstract;109
10.2;1 Introduction;110
10.3;2 Mathematical Model Description;112
10.3.1;2.1 Sliding, Sticking and Partial Sliding/Sticking Condition;112
10.4;3 Experimental Set-up;115
10.5;4 Numerical Model Description;116
10.6;5 Results and Discussion;117
10.6.1;5.1 The Effect of the Temperature in the Friction Coefficient;117
10.6.2;5.2 Temperature Distribution Results at Different Welding Stages;120
10.6.3;5.3 Temperature Profile at the Welding Cross Section;120
10.6.4;5.4 Temperature Distribution in the Top Surface;123
10.6.5;5.5 Temperature Comparison of Different Friction Coefficient Values;125
10.7;6 Conclusions;126
10.8;References;127