Abélard / Ltd / Baxter Euro Ceramics V

Erscheinungsjahr 1997
ISBN: 978-3-0357-0364-1
Verlag: Trans Tech Publications
Format: PDF
Kopierschutz: 0 - No protection

E-Book, Englisch, 2572 Seiten

Comprising more than 580 papers, the aim of this 3-volume set is to provide the reader with a comprehensive overview of the relevant trends in the research and development of all aspects of ceramics. It will constitute an excellent reference source for every researcher working in the field.

Autoren/Hrsg.

Abélard, P.

Ltd, Trans Tech Publications

Baxter, J.

Bortzmeyer, D.

Inhaltsverzeichnis

Foreword
Hydrothermal Processing of Perovskite PbTiO3 Powders
Extraction of Binders with Supercritical Carbon Dioxide
Nanostructured Ceramics via Microemulsion Processing Routes
Novel Ceramic Processing Methods Using Responsive Polymers
Direct Study of Size Effect at Gel-Sol Preparation of Stabilized Zirconia in the ZrO2-Yb2O3 System with use of Synchrotronic Irradiation
Urea-Formaldehyde as a Precursor for the Preparationof Alumina-Zirconia Composites by Sol-Gel Polymeric Route
Urea Formaldehyde as a Precursor for the Preparation of Titania by Sol Gel Polymeric Route
PZT-Piezoceramic Derived from Emulsion Powder
Sol-Gel Method used for Synthesis of Ceramic Pigments
Preparation of Bismuth Layered Oxide Powders by Chemical Routes: Molten Salts and Sol-Gel Syntheses
Hafnia and Hafnia-Zirconia Mixed Oxide Ultra Spherical Microspheres Made by a Sol-Gel-Vibrational Dropping Process
Aluminium Titanate-25vol% Mullite Composite Powder Obtained by Different Processing Methods
Synthesis and Sintering Behavior of Nanocrystalline ZrO2 - 3 mol% Y2O3 Powders
Epitaxial Zirconia Films on(11-20) Planes of Sapphire
Effect of Praseodymium Doping on the Properties of Ca-FSZ Obtained by Gel Methods
Study of Synthesis Methods to Obtain the Ceramic Pigment Pink Coral, Fe-ZrSiO4
Chemical Preparation of Pb(Zn1/3Nb2/3)O3 - Pb(Fe1/2Nb1/2)O3 Powders from Nitrate Solutions
Aspects Regarding the Formation of the Spinel Phase in the MeO-Al2O3 and MeO-TiO2 Systems
Effect of seeding on a-Al2O3 Powder Formation from Bayerite and Bohemite
Synthesis by Coprecipitation and Characterisation of Materials Obtained from the System NiO-Al2O3-SiO2
Wet Chemical Preparation of Doped Barium Titanate Powders and Ceramics
Solid Solution La2-xSrxNiO4 Preparation by the Citrate Method
A New Solution Way to Prepare Hydroxyapatite Powders
Powders Agglomeration Grade in the ZrO2-Y2O3 Coprecipitation Process
Preparation Conditions and Sintering Ability of Ceramic Powders
High Stability Ceramic Pigments
Stabilisation of Transition Aluminas by Alkaline Earth Ions
Preparation and Characterization of Metastable ZrO2/Al2O3 Solid Solution
Controlled Morphology of Nickel Manganite Powders
Spinel Pigments in the ZnO-CoO-Al2O3-Cr2O3 System Prepared from Organometallic Precursors
Hydrothermal and Activated Solid State Syntheses of SrTiO3 Fine Powders
Mechanism of the Hydrothermal Crystallisation of Zirconia
Hydrothermal Synthesis and Properties of BaTiO3 Powder Destined for PTCR Ceramics
Hydrothermal Synthesis of Colloidal Zirconia
Cerium Stabilized Zirconia by Mixing Hydrothermally Synthesized Monoclinic Zirconia with Cerium Nitrate
Synthesis and Growth Mechanism of ThO2-W Nanocomposite Powder
Laser Synthesis of Nanometric Si/C/O Powders from an Aerosol of Hexamethyldisiloxane
Calorimetric Study of the Thermal Induced Transformations of Ultrafine Silicon Carbide Powder Produced by RF Glow Discharge
Reactions between SiCl4 and NH3 Leading to the Formation of Silicon Nitride Powders
Nanosize Powders Prepared by Flame Pyrolysis
Novel Ceramic Matrix Nanocomposite Powders Containing Carbon Nanotubes
Production of Nanosized Zirconia-Particles by CO2 Laser Evaporation
Al2O3-SiC Nanocomposites Obtained through the Dispersion of Nonometric Powders
The Influence of the Preparation Conditions of Nanocrystalline Zirconia on Powder Processing and Ceramic Properties
Producing Al and Al2O3 Nanopowders by Electrical Explosion of Wire
TEM Studies of Nanometric Ceramic Oxide Powders Prepared by Ball-Milling
Influence of the Synthesis Route on the Characteristics of Zirconia Nanomaterials
Ceramics from Fine Plasma-Processed AlN Powder
Characterization of Oxycarbide Glasses Prepared by Melt Solidification
Direct Crystallization of BaTiO3 Glass Ceramics
Synthesis of Spinel Powders by the Spray Pyroloysis Method
Synthesis and Characterization of Transition Metal Carbide Whiskers
Ni/Alumina Catalysts Produced by Combustion Synthesis
Combustion Synthesis of Aluminium Titanate: Thermal Stability
Size Distribution of Ultrafine Spherical Ceramic Powders Obtained by Ultrasonic Spray Pyrolysis
Preparation of LaCrO3 Based Materials by Autoignitation of Citrate- Nitrate Gel
Preparation of Plasma Sprayable ß- Whitlockite Powder
Synthesis of LiAlO2 and LiGaO2 by Ion Exchange Reaction
Synthesis of Mullite Precursors in Molten Salts Influence of the Aluminium Source of Salt
Point Defects Effect on the Sintering of Alumina
Modification of the Surface Properties of a Titania Nanopowder by Grafting: A Fourier Transform Infrared Analysis
The Ceramic Humidity Sensors on the Base of MgAL2O4
On Peculiarities of Non-Isothermal Synthesis of fine Ferroelectric Powders
Effects of Heat Treatments on the Local Order in Si/C/N Nanopowders Studied by X-Ray Photoelectron Spectroscopy
Identification of Barium Carbonate in Barium Titanate powders
Methylene-Blue Adsorption on Latvian Clay Powders
Study of Vaporization during Heat Treatment of ß-Spodumene and a-Cordierite Sol-Gel Powders
HRTEM and XRD Study of the Crystallization of Zirconia Precipitate: an Explanation of the Well Known ''Glow Effect''
FT- IR Spectroscopy as a Method for the Study of the Different Crystallization Forms of CaCo3
Improved Characterisation of Ceramic Powder Surfaces - A Comparison of Different FTIR-Spectroscopy Methods
Study of Malayaite Synthesis CaSnSiO5
Optimisation of Ceramic Suspensions
Aqueous Silicon Nitride Suspension: Effect of Surface Treatment on the Rheological and Electrokinetic Properties
Dispersion, Stabilisation and Casting of Calcium Carbonate Suspensions
Influence of Iso-Propyl Alcohol Addition on the Electrophoretic Deposition of SiC from a Mixture of Acetone and n-Butylamine
Zirconia-Toughened Alumina (ZTA) with Improved Homogeneity for Tribological Applications
The Interaction of Barium Titanate with an Aqueous Suspending Medium
The Effect of pH on Barium Titanate Aqueous Suspensions
Aqueous Suspensions of aAl2O3/SiC Mixed Systems
Colloidal Processing of Alumina with MgO Additions
ESA Measurement of Electrokinetic Properties-Possibilities and Limitations
Shear-Dependent Behaviour of Calcium Carbonate Aqueous Suspension
Aqueous Processing of Carbothermally Prepared Ca-a-SiAlON and ß-SiAlON Powders: Powder and Suspension Characterisation
Characterization of Alumina Suspension by Electroacoustics
Characterisation of Organic Additives and their Adsorption Behaviour on Alumina Particle Surfaces using HPLC
Development of Ceramic Inks for Jet Printing: Effect of Conductivity
Cost Effective Reliable Silicon Nitride for High Performance Structural Applications
Correlation Between Rheological Behaviour of Alumina Slips and Characteristics of Pressure Cast Bodies
Industrial Pressure Casting of High Alumina Ceramics
Drying of Aqueous Ceramic Suspensions
Influence of Magnesia on Drying-Shrinkage Behaviour of Alumina
Aqueous Tape-Casting of Silicon Carbide
Utilisation of Alumina Green Tapes Obtained by Tape Casting of Aqueous Slurry for the Fabrication of Straight or Curved Thin Ceramic Tubes
Centrifugal Slip Casting of Alumina
Influence of Slip Viscosity on the Mechanical Properties of High Purity Alumina Made by Gelcasting
Improvement of Mechanical Properties of Green Powder Compacts by Using Novel Binder System
Constant Pressure Filtration of Compressible Ceramic Powder Compacts
Thermal Resistance of Porous Alumina Ceramics Prepared from the Spray Pyrolyzed Powders
Dry Compaction of Alumina Granules. Influence of the Binder System Glass Transition Temperature
The Effect of Lubricants on Closure of Large Pores During Powder Compaction
Compacting Mechanisms of a Multicomponent Atomized Ceramic Powder
Principles of Pulsed Compaction of Ceramic Nano-Sized Powders
Characterization of PZT Powder Prepared by Spray Drying
The Effect of Dispersion and Atomisation Conditions on the Compaction Response of Silicon Nitride Granules
Measurement on the Effect of Absolute Pressure on the Extrusion Properties of Ceramic Pastes
Microstructure Formation in Ceramic Injection Molding
The Influence of Binder Properties on the Plasticity and the Properties of Raw Extruded Ceramics
Lamination of Ceramic Green Tapes
Extruded Aluminium Nitride-Manufacture, Properties and Application
A Novel Method for Preparing Porous Alumina Objects
Green Machining of Alumina
Effect of Moulding Pressure on Pore Structure
Near Net Shaping of Complex Components by Hot Moulding
Low-Shrinkage Mullite Derived from Filled Polymeric Siloxanes
The Peel Adhesion Test for Metal-Ceramic Interfaces
Reliability of Ferrite Cores in Applications and Quality Control Tests
On the Hardness and Brittleness of Ceramics
Effect of Grinding Parameters on the Strenght and Reliability of Al2O3
Effect of Surface Grinding on the Reliability of Alumina
The Transition from Palmquist to Median-Radial Crack Systems Within WC-Co Cermets
Direct Measurement of Friction Applicable to Hot Strength Measurements
Fracture Behaviour of Ceramic Foils in Uni- and Biaxial Tension
A Simple Technique for Fracture Toughness Measurements Using Specimens with Very Thin Notches
Development of a Bending-Test Device for Small Samples
Crack Branch Lengths and Fracture Feature Sizes in Biaxially Stressed Glass Discs
Dynamic Fatigue of Glass-Bonded Alumina Ceramics
Study of R-Curve Behaviour in alumina by In Situ Observation of Stable Indentation Crack Growth
The Non-Linear Mechanical Behaviour of High Performance Refractories
Mechanical Properties of the Ti3SiC2 - TiC Material
Slow Crack Growth in 3Y-TZP under Static and Cyclic Fatigue
Increase in Fracture Toughness of Monolithic Ceramics by a Partial Reduction Treatment
Improvement of the Mechanical Properties of Magnetic Ceramics
Thermomechanical Behaviour of TiB2-AlN Composites
Mechanical and Microstructural Characterization of SiC Materials Hot-Pressed from a and ß Powders
Fracture Characteristics of Abrasive Particles
Applicability of LEFM to Coarse-Grained Ceramics and Composites
Fabrication, Structure and Properties of In-Situ Reinforced Si3N4 Ceramics from Sol-Gel Derived Oxide-Additive-Coated Powders
Biaxial Fatigue of Sintered Hydroxylapatite
Technological Aspects at Development of 2.5 MW Stationary GTE Ceramic Components Structures
Anisotropic Deformation and Fracture of Indented PZT
Microstructure Development in Superplastic Silicon Nitride
Observation of Different Interfaces in Silicon Nitride by HRTEM. Influence of the Microstructure on the Creep Properties.
Shear Viscosity of an Oxynitride Glass Interlayer
Compressive Deformation of Low-Doped Silicon Nitride Ceramics with Different Microstructures
High Temperature Behaviour of a Zircon Ceramic
Compressive Deformation of Fine-Grained Al2O3 in a Reducing Environment
High Temperature Compression Tests Performed on Doped Fuels
Long-Term (>30,000-40,000 h) Creep Behavior of an Advanced Si3N4 Ceramic
High Temperature Creep of Polycrystalline Mullite
High Temperature Mechanical Properties and Creep Behaviour of Different Mullites
Thermomechanical Properties and Creep of Mullite from Rapidly Quenched Powders
Effect of Specimen Size on Thermal Shock Properties of an Alumina
Thermal Shock of Ceramic Material: Damage Resistance Parameters and Critical Flaw Size
Quantitative Approach of the Effective Coefficient of Heat Transfer During Quenching Vickers Indented Ceramic Samples
Toughness and Thermal Shock Resistance of Melt-Textured YBaCuO Ceramic Superconductors
Study of the Relationship Between Microstucture, Fatigue and Thermal Shock Behaviour of Si3N4
Thermo-Mechanical Behaviour of Structural Ceramics Submitted to Mild Thermal Shocks
Mesoscopic Modeling of the Intergranular Structure of Y2O3 Doped Aluminium Nitride and Application to the Prediction of the Effective Thermal Conductivity
Effect of Particle Size on the Thermal Shock Behaviour of a Zirconia Refractory Partially Stabilised with Magnesia
The Effect of Powder Processing Route on the Hydrothermal Degradation of Y-TZP
Low Temperature Ageing of 3Y - TZP: Influence of the Microstructure
Thermal Fatigue Behaviour of Controlled Surface Flaws in Alumina
Microstructural Damage in Hafnium Diboride Under Neutron Irradiation
Phase Transformation of Gd4Al2O9 at High Temperature
Measurement of Grain Boundary Sliding by Atomic Force Microscopy in Superplastically Deformed Ceramics
Internal Friction Decrease in Silicon Nitride Due to Crystallization of Intergranular Phases
High Temperature Microplasticity of Fine-Grained Y-TZP Zirconia Studied by Mechanical Spectroscopy
'Photothermal Characterisation of Microelectronics Ceramics at Various Scales'
High Temperature Tensile Testing Apparatus for Industrial Ceramics Characterization
Shape Prediction Procedure for Die Pressed Ceramic compacts
Structure Development During Linear Heating and Rate-Controlled Sintering of Ceramics: Statistical Model and Experiment
Modelling of Binder Burnout Process for Ceramic Compacts
Modelling of Thermal Shock Behaviour
Finite Element Modeling of Binder Removal from Ceramic Moldings
Numerical Simulation of Alumina Fracture
Rheological Analysis of Stress-Strain Hysteresis in Silicon Nitride at High Temperature
Experimentally Verified Numerical Analysis of Internal Thermal Stresses in Alumina Ceramics with Grain Size Effect
Creep Damage Model for Ceramics
Stress Distribution in Silicon Nitrice Joints with Metallic Interlayers
Computational Modeling of Sintering Process in Ceramics
Modelling of Subcritical Crack Growth in MnZn Ferrites
Graphic Simulation of STM Images of Si(111)7X7 Surface
Conductive Mode Imaging for Grain Boundary Property Determination in Electroceramics
AFM Investigation of Electrical Double Layers on SiO2 Surfaces
Quantitative Determination of Density Gradients by Three-Dimensional Computertomography (3D-CT)
Investigation of Hardness and Elastic Contants on Silicon Nitride Based Composites by Recording Micro Hardness Tester
Dense and Nanostructured Ceramics by Low-Temperature Pressureless Sintering of Nanosized Y-TZP Powders
Synthesis and Characterization of Alumina Matrix Nanocomposites Containing Carbon Nanotubes
Microstructure and Mechanical Properties of Ti(C,N)-Mo2C-(Ni,Co) Cermets as a Function of their Initial Chemical Composition
Origins and Avoidance of Colour Inhomogeneities in Silicon Nitride Ceramics
On the Valence States of Yb, Sm and Eu Ions in a-Sialon Based Ceramics
Superstructure of C3S Polymorphs
Stabilised Zirconium Dioxide in the MgO-CeO2-ZrO2 Ternary System
Fanning Laser Light Application to the Characterization of Bi12TiO20 and Bi12SiO20 Crystals
Solubility of Erbium, Praseodimium and Vanadium in ZrO2, ZrO2-CeO2 and ZrO2-Y2O3
Decomposition of Nitrous Oxide over Perovskite Type Mixed Oxides
Tie-Lines to ß'-sialon in the Si-Al-O-N Phase Diagram
Properties of Novel Ceramic Materials in the BaO-Al2O3-AlN-MgO System with a ß-Alumina Type Structure
Diffusional Properties of Tic at High Temperatures
Subsolidus Equilibria in the Sn-Sb-Cu-O System
Structural Characterisation of New Y-Si-Al-O-N Oxynitride Glass Ceramics
The Driving Force for a-ß Transformation in Rare Earth a Sialon Ceramics
Novel Calcium Phosphate/Polylactide Composites: Its In Vitro Evaluation
MoSi2 Self-Purification Through High-Temperature Synthesis
Thermodynamics and Kinetics of Decomposition of Al2TiO5-Base Ceramics
Preparation of Pure B-Phase Glass-Ceramic in the Yttrium SiAION System
Elaboration of Composites by Reactive Sintering of AIB2 and TiN Powders
Study on the Sintering of Aluminium Titanate-Mullite by Using a Constant Heating Rate
Low-Thermal Expansion Zirconyl Phosphate Ceramic
Reaction Kinetic in the ZrO2 - Li2O System
Effect of Isomorphous Substitutions on Crystallization of Fluorrichterite Glasses
Comparison of Preparation Mechanism of Al2TiO5 during Various Heat Treatment Techniques
A Mechanism for Aluminium Powder Nitridation
Solid State Reactions in the Sb-Sn-Cu-O System Studied by IR Spectrometry