E-Book, Englisch, 1220 Seiten
ISBN: 978-3-03813-058-1
Verlag: Trans Tech Publications
Format: PDF
Kopierschutz: 0 - No protection
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Fabrication of Photocatalytic TiO2 Thin Film Using Innovative Aerosol Deposition Method
Titanium Oxide-Based Photocatalysts: -From Fundamentals to Practical Applications-
Design of Efficient TiO2/SiC Photocatalysts from TiC-SiC Nano Particles for Degradation of Organic Pollutants Diluted in Water
Bioactivity of Plasma-Sprayed TiO2 Coating in Simulated Body Fluid by Hydrofluoric Acid Treatment
Nitride Formation on Titanium under Irradiation of Intense Pulsed Ion Beam
VOC Decomposition by Photocatalytic Wall Paper
Photo-Decomposition Property of Thermal Sprayed TiO2 Coatings
Hydrogen Production by Catalytic Decomposition of Methane over Carbon Nanofibers
Photocatalytic Oxidation and Decomposition of Acetic Acid over TiO2, TS-1 and Ti-MCM-41 Catalysts
Impact Evaluation to Human Body Skin of Titania Photocatalyst Fine Particles
A Novel Formulation for the Modification of Transition Metal Oxide Surfaces for Antifogging Optical Application
Dispersion Stability of TiO2 Powder Synthesized by Homogeneous Precipitation Process at Low Temperatures
The Electrochemical Properties of Poly(acrylonitrile) Polymer Electrolyte for Li/S Battery
Correlation of Superhydrophilicity and Photocatalytic Activity in the TiO2-Based Porous Thin Films
Photocatalytic Properties of Mesoporous TiO2 Films Derived from Evaporation-Induced Self-Assembly Method
Influence of Deposition Parameters on Adhesion/Cohesion of Plasma Sprayed TiO2 Coatings
A Comparison of Different Preparation Methods of Fe-Mo-Mg-O Catalyst for the Large-Scale Synthesis of Carbon Nanotubes
Photocatalytic Characterization of Plasma Sprayed TiO2 Coating in Environmental Engineering Application
Microstructure Characterization on TiO2 Based Anodes
Preparation and Antibacterial Activity of Silver Ions-Substituted Hydroxyapatite/Titania
Photocatalytic Decomposition of NOx Using Ti-, V-, and Mo-MCM-41 Catalysts
Influence of Doping on the Antibacterial Effect of TiO2 Nanoparticles
Raman Spectroscopic Investigation of Nitrogen-Doped Titanium Dioxide Nanoparticles
Characterization and Synthesis of Functional TiO2 Sol-Gel Coatings on the Glass
Photo-Oxidation Decomposition of TiO2 Photocatalyst for the Construction Materials
Preparation of Ternary Compound BaLi2Ti6O14 by the Sol-Gel Process
Dependence of Yellow Phosphor on Optical and Electrical Properties of the White Light Emitting Diode Chip
Effect of Hydrothermal Conditions on the Cation Exchange Capacity of MSWI Fly Ash
Mechanical Properties of Nanocrystalline HVOF Coatings
Characterization of Li1-xNi1+xO2 Prepared by Using Tartaric Acid as a Complexing Agent
Nd3+-Doped TiO2 Nanoparticles Prepared by Sol-Hydrothermal Process
The Effect of Substrates on the Characteristics of Titania Nano-Coated Particles Prepared by Fluidized Bed Chemical Vapor Deposition (FBCVD)
Photocatalytic Properties of TiO2 Coatings Prepared by Cold Spray Process
Effects of Constituents in Bio/Photocatalytic Hydrogen Production System Using Experimental Design Tool
Nanosized Titanium Oxynitride and Molybdenum Oxynitride Particles Assembled in Mesoporous Silica MCM-41
Simulation of Electric Upsetting and Forging Process for Large Marine Diesel Engine Exhaust Valves
Appearance of Indium Oxide Nanorods in MOCVD Growth
Compressive Deformation Behaviour of a Closed-Cell Aluminum
A Simple Reliable Method of Selecting Epoxy Molding Compounds for High Power Short Wavelength Light Emitting Diode Packages
Evaluating the Electrochemical Properties in the Protection Potential of Material for Use in Al Vessels in Seawater
A Slow Strain Rate Test Experiment to Evaluate the Characteristics of High-Strength Al-Mg Alloy for Application in Ships
Effects of Current Density on the Formation of Anodic Oxide Films on AZ91
CdSe/ZnS Quantum Dots Loaded Solid Lipid Nanoparticles: Novel Luminescent Nanocomposite Particles
Corrosion Behavior of Chromium Cast Iron and Steel in Hot Concentrated Alkaline
In-Situ Joining of Combustion Synthesized Ni-Al Alloys with Al Casting Alloy
Evaluation of Microstructure on SiCp/AZ91 Magnesium Composite Fabricated by Rotation-Cylinder Method
Sliding Friction and Wear Properties of Composite Reinforced by Mullite
Enhancement of the Characteristics of the ALD HfO2 Film by Using the High-Pressure D2 Annealing
Improvement of the Core Loss of SiFe by Optimizing the Operation Conditions of the Laser Scribing
Nanocrystalline Structure of Organic Photoconducting Materials Derived by Microwave Recrystallization Method
Microstructures and Wear Properties of Al Matrix Composites Fabricated by Two Different Processes
Dispersion Stability of Ni Nanoparticles in Ethanol with Poly (1-Vinyl-2-Pyrrolidone)
Effect of Heat Treatment on Microstructure, Tensile Properties and Damping Capacity of Mg-Zr Wrought Alloy
Microstructures and Mechanical Properties of Mg-Zn-RE-Ca Casting Alloys
Characteristics of Thin Film of Nano-Hybrid Synthesized from Acrylic Resin and Colloidal Silca-Silane Sol
Properties of Coating Films Synthesized from Nano Colloidal Silica and Alkoxy Silanes
Effect of Processing Parameters on the Fabrication of Al2O3p/Al Composites by In-Situ Reaction Process of Molten Al
Effects of Processing Parameters on the Mechanical Properties of SiCp/AC8A Composites by Pressureless Metal Infiltration Process
Wear Characteristics of Particulate Reinforced Metal Matrix Composites Fabricated by a Pressureless Metal Infiltration Process
Modification of Mg2Si Morphology in As-Cast Mg-Al-Si Alloys with Strontium and Antimony
Chipless Forming Process Using Rotary Swaging Machine with Four-Dies
Microstructure Analyses and FE Simulation of Automotive Product in the Hot Forging Process Using Aluminum Alloys
Castability, Tensile and Creep Properties of Mg-xAl-Zn with Variation of Al Content
Development of Manufacturing Process Using Cold Incremental Forming Technique for Micro-Alloyed Non-Heat-Treated Material
Development of Cube-Textured Ni and Ni-W Alloy Tapes by Focused Infrared Heating
Shape Memory Effect and Superelasticity of an Equiatomic Ti-Ni Alloy with Surface Sulfide Layers
Electrochemical and Structural Properties of Si/Ni/Cu Electrode Films Fabricated with Different Methods
Reciprocating Sliding Wear Behavior of Inconel 600 Mated with SUS 304 Stainless Steel at Elevated Temperatures
The Cavitation Behavior of Fe-Cr-C-Si-Ni Alloys
Effect of Tin on the Microstructures and Mechanical Properties of a Au-Pt-Cu Alloy
Effect of Indium on Bonding between Porcelain and Au-Pt-Cu Alloy
Fabrication and Magnetic Properties of Mullite Based Nanocomposites with Embedded FeCr Alloy Nanoparticles
Al-La-Ni-Fe Amorphous Alloys and Amorphous-Crystalline Composites Produced by Mechanical Alloying
Net-Shape Forming of TiAl Automotive Parts for Fuel Efficiency
Effect of Al on Microstructural and Mechanical Characteristics of Plasma Electrolytic Oxide Coatings on Magnesium
Effect of Impurity and Gas Nature on Microstructure of SiC Microtubes in Double Step Reaction Process
Modified Fabric and Its Electromagnetic Protection Characteristics
Interfacial Reaction between Molten Al Alloys and Titanium Matrix Composites
Preparation and Characterization of Chemical Activated Fibers on Various Carbon Fibers
Fabrication of Ni Sulfides by Thermal Sulfidation
Fabrication of Nickel-Silver Rods and Plate through a Small Cross Section Continuous Casting Process
Combinational Effects of Ni Precursors on Ni/YSZ Cermet Anode
Optimization of Sheet Metal Process Parameters of a Shield Case Piece Using Computer Simulation
Development of 2-Cavity Die Casting Process for AM50 Mg Steering Column Lock Housing Module
Synthesis Nanosized MgAl2O4 Spinel Powder with Excellent Sinterability
High Temperature Deformation Behavior of Pre-Sintered Al-10Si-5Fe Based Alloy
Mechanical Behavior of TiB2 Nanoparticles Reinforced Cu Matrix Composites Synthesized by In-Situ Processing
Microstructures and Tensile Properties of Fe-40Al Intermetallic with High Boron Content
Fluidity of A356 Alloy during In-Ladle DTC Rheocasting
High Temperature Mechanical Properties of Ni-Al-Cr Based Alloys with Refractory Alloying Elements
Microstructural Control of 7075 Al Wrought Alloys through Thixoextrusion Route
Thermal and Phase Evolutions of As-Milled Powders Fabricated by Mechanical Alloying in the TiH2-C System
H2S/CO2 Corrosion Behavior of Tubular Goods under High Temperature and High Pressure
Improved Heat and Corrosion Resistance of Mg-Al-Zn Alloys by Additions of Minor Alloying Elements
Characteristics of Spent Foundry Sand - Loess Mixture as Ceramic Support Materials
The Transfection Efficacy of Chitosan-DNA Nanoparticles on MGC803, SMMC-7721, MG63 Cells
Characteristic Evaluation of Extrusion Parameters on Direct Extrusion Process of 3003 Al Alloy Used for Automotive Condenser Tubing
Vacuum Diffusion Brazing of Al5052 Alloys Using Ag-28Cu Insert Metal
Morphological Evolution of Primary Solid Phase in Semi-Solid Slurry during the Isothermal Holding
Thermal Conductivity of Hot-Pressed BN Ceramics
Evaluation of Oxidation Behavior of the C-B4C-SiC Composite through
