Chang / Kim / Lee PRICM 6

Erscheinungsjahr 2007
ISBN: 978-3-03813-119-9
Verlag: Trans Tech Publications
Format: PDF
Kopierschutz: 0 - No protection

E-Book, Englisch, 2600 Seiten

This work comprises edited versions of papers presented at the 6th Pacific Rim International Conference on Advanced Materials and Processing (PRICM-6), held on Jeju Island, Korea between the 5th and 9th November, 2007.

Autoren/Hrsg.

Chang, Young Won

Kim, Nack J.

Kim, Nack

Lee, Chong Soo

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

Plenary
Improvements & Innovations in the Continuous Casting Process at POSCO
TiNi-Base and Ti-Base Shape Memory Alloys
Advanced Ferrous Alloys and Processing
The Recrystallization Behaviour of Nb Microalloyed Steels
Phase Transformation Rule, Microstructure and Properties of JG590 High Strength Steel
Effect of Initial Grain Size on the Dynamic Recrystallization Behaviours of Austenite
Microstructure and Mechanical Properties of Ni-Free High Nitrogen Austenite Stainless Steels Fabricated by Mechanical Alloying Method
Enhancement of Fatigue Strength of SAE 1045 Steel by Tempering Treatment and Shot Peening
Effect of Lower Final Rolling Temperature on Mechanical Properties of V-N Microalloyed Mild Steel
Effect of Reheating and End Cooling Temperature on Microstructure Refinement in a Low Carbon High Strength Nb-Ti Microalloyed Dual Phase Steel
The Comparative Effectiveness of Nb Solute and NbC Precipitates at Impeding Grain Boundary Motion in Nb-Steels
Microstructural Features of a Ultra Low Carbon High Strength Acicular Ferrite Steel Thick Plate
The Study of Inner Surface Crack Formation of Seamless Modified 9Cr-1Mo Tube Rolled on Mandrel Mill and Its Application
The Nanohardness of Acicular Ferrite and Bainitic Ferrite in Low Carbon Microalloying Steel
Crystallography of BCC Precipitates at Grain Boundary Corners in FCC Matrix
Slab Method Analysis and FEM Simulation on Rotating Compression Forming of Cylinder Considering Coulomb Friction
Effects of Ti and Nb Stabilization on the Recrystallization and the Pitting Potential in Fe-21%Cr Ferritic Stainless Steels
Effect of Intermittent Heating on Creep Behaviour of Advanced 9-12%Cr Power Plant Steels
Optimization of Residual Manganese in Molten Metal in Basic Oxygen Furnace (BOF)
Superplastic Deformation Behavior of Spray Formed High Speed Tool Steel at 820°C
Effects of Addition of V and Nb on O in High Cr Ferritic Steels
Microstructural Characterization of Oxide Scale Formed by Early Stage of Oxidation of 17%Cr-Mn-Ni Austenitic Stainless Steel
Study on Susceptibility of Hydrogen Embrittlement in a Tool Steel
High Speed Deformation of Ultrafine Grained TWIP Steel
Precipitation Hardening in Fe-1.03%Cu Structural Steel
Mechanics of Asymmetric Rolling of Thin Strip with Effect of Work Roll Edge Contact
Light Metals
The Role of Deformation Twinning on Creep of Titanium Alloys
Industrial Application in 2014 T6 Aluminum Alloys Having High Corrosion and Weather Resistant by Anionic Resin Coating with Mirror Luster
Formation of a Recrystallized and Recovered Multilayered Microstructure in a Hybrid Aluminium Alloy
Effects of Sb and RE on the Solutionized Microstructure and Microhardness of Mg-6A1-1Zn-0.7Si Magnesium Alloy
Improvements in Strength and Electrical Conductivity in 7B04 Aluminum Alloy Pre-Stretched Thick Plates Via Low-Temperature Retrogression and Re-Ageing Heat Treatments
Influence of Structure and Ionic Radius on Solubility Limit in the Mg–Re Systems
Study on the In Situ SEM Tension Observation of E-A356 Alloys
Characterization of Intermetallic Phases and Planar Defects in Mg-Y-Zn Alloys
A Constitutive Equation Coupling the Grain Size during the High Temperature Deformation of Ti-6.62Al-5.14Sn-1.82Zr Alloy
The Influence of Process Parameters during Machining of Ti6Al4V Alloy
Long Term Creep Properties of a Die-Cast Mg-Al-Ca Alloy
Fundamental Research on Fatigue Properties of Closed-Packed Hexagonal Lattice Metal under Biaxial Stress
Precipitation Hardening Behavior of Al-4wt.%Cu Alloys Aged at Low Temperature under High Magnetic Field
Microstructural Refinement and Mechanical Property Improvements of Ti-5Al-1Sn-1V-1Zr-0.76Mo Alloy by Equal Channel Angular Extrusion Processing
Mechanical Properties and Press Formability of Mg Alloy Processed by Cross-Roll Rolling
In Situ Investigation of Orientation Changes during Heating of Extruded AZ31
Influence of Extrusion Temperature on Microstructure, Texture and Fatigue Performance of AZ80 and ZK60 Magnesium Alloys
Development of New Types of Magnesium Alloys Containing Sr or RE Elements
Structure and Mechanical Properties of Mg-Zn-RE System Alloys
Hydrogen Evolution Behavior in an Al-Mg-Si Alloy Affected by Hydrogen Embrittlement
Tensile Properties and Deformation-Fracture Behavior of Ti-6Al-4V Alloy at Cryogenic Temperature
Study on Al Alloy Surfaces Treated by Ion Beams
Determination of Sr Content in Mg-Sr Alloys Using Faas
High Temperature Tensile Properties of a Mg-8%Li Alloy Shear-Strained by Torsion Working and ECAP
Recycling of Mg-Al-Ca Based Alloy by Vacuum Distillation
Laser Rapid Forming of Ti-Ni Functionally Graded Alloy
Microalloying Effects of Ca, Ag, Ni and Zn on Mechanical Properties in an Mg-3mass%Y Alloy
Improvement of Strength and Ductility by Controlling PFZ with Microalloying Elements in Al-Zn-Mg Alloys
The Effect of Ag-Addition on Precipitation Sequence in Al-1.0mass%Mg2Si-Excess 0.4mass%Si Alloy
HRTEM Observation of Rod-Shape Precipitates in Al-Mg-Si-Ag Alloy Aged at 523 K
Research on Solution and Aging Treatment of Mg-7Zn-3Al Alloy
Effect of Processing Route on Microstructure and Texture Development in ECAP of Al-Ti Alloy
Effects of Homogenization Treatment on Mechanical Properties of Hot-Rolled AZ31 Magnesium Alloy
Fatigue in Ti-6Al-4V at Very High Cycles
3D Image-Based Modeling of Ductile Fracture in an Aluminum Alloy Using Synchrotron X-Ray CT Images
Fatigue Fracture Behavior of Mg-Zn-Y Alloys
Developments of Magnesium Alloys by Melt Stirring Method
HREM and HAADF Studies of Precipitates in the Mg-Y-Nd Alloy System
Microstructural Characterization and Temperature Analysis in Friction Stir Welding of A383/5052 Dissimilar Aluminum Alloys
First-Principles Calculation of Interaction Energies between Solutes and/or Vacancies for Predicting Atomistic Behaviors of Microalloying Elements in Aluminum Alloys
Influences of Rolling Conditions on Texture and Mechanical Properties of AZ31 Magnesium Alloy Processed by Differential Speed Rolling
Effect of Granule Size in Semi-Solid Slurry on Rheo-Extrusion of A7075 Aluminum Alloy
Influences of Hydrogenation on Microstructure and Microhardness of Ti6Al4V Alloy
Phase Analysis for Mg-Zn-Y Magnesium Alloys by Using Extraction Technology
HRTEM Observation of Precipitates at Early Stage of Aging in Mg-Gd-Zr Alloy
HRTEM Observation of the Age Hardening Precipitates in Mg-Gd-Sc Alloy
Changes in the Mechanical Properties and Microstructure of AZ91 Cast Mg Alloy Caused by Heat Treatment
Microstructure Sensitive Design and Quantitative Prediction of Effective Conductivity in Fuel Cell Design
Effects of Various Thermal and Environmental Exposure on the Mechanical Properties of Aluminum Alloys
Effect of Initial Microstructure under Different Solidification Conditions on Hot Working Behavior of AZ31 Alloy
Effect of TiH2 on the Microstructures and Refining Performance of Al-Ti-C Master Alloy
Solute Content and the Tensile Behavior of High Pressure Die Cast Mg-Al Alloys
Electromagnetic Stirring Processing and its Influence on Mechanical Properties of ZL102(or Al-Si) Alloy
Investigation of Streaking Defects on Aluminium Extrusions
Integrating Process, Material and Business Strategies to Transform a Small-Medium Aluminium Products Manufacturer
On-Line Aging to Improve the Tensile Strength and Conductivity of Cold-Drawing AA6201 Wires
From Angel Food Cake to Porous Titanium – A Novel Powder Metallurgical Approach for Metallic Foam Utilizing Food Processing and Ceramic Processing Techniques
Resistance of Thin Al Foam Panels to Deep Indentation
Intermetallics and High Temperature Alloys
Preparation of the Al-Cu-Co and Al-Cu-Ni Ternary Intermetallic Powders via a Solid-Liquid Reaction Ball Milling Technique
Preparation of Ti-Al Intermetallics by Aluminum Melt Infiltration-Diffusion Annealing Technique
Oxidation Behavior and Pack Siliconized Oxidation-Resistant Coatings of an Nb-Based Ultrahigh Temperature Alloy
Microstructure and Mechanical Properties of Dual Multi-Phase Intermetallic Alloys Composed of Geometrically Close Packed Ni3X Structures
Development of a Second Generation TiAl Turbocharger
Microstructure and Deformation Behavior of Lamellar Ti-Rich TiAl Crystal with Lotus-Type Aligned Pores
Microstructures Evolution of a Ni-Base Superalloy after Long-Term Aging at 750°C
Effect of Third Elements on Pseudoelastic Behavior in Fe3Al Single Crystals
Strengthening and Ductilization of D03-Type Fe3Al Intermetallic Alloys by Dispersion of Laves Phases Fe2Zr and Fe2Nb
Mechanical Properties of Zr-Added Fe-Al Intermetallic Alloys Containing Large Second Phase Particles
Influence of Electrical Parameter on the Size of Superalloy Powders Prepared by Spark Plasma Discharge Process
Microstructure and Plastic Deformation Behavior of Ni3V Single Crystals
The Effects of Nb and Cr Addition on Mechanical and Chemical Properties of Cold-Rolled Ni3(Si,Ti) Intermetallic Foils
Microstructure and Mechanical Properties of In718 Alloy Produced with Twin-Scanning Atomizer
Dependence of Strain Rate and Environment on the