Chang / Kim / Lee Advanced Materials and Processing

Erscheinungsjahr 2007
ISBN: 978-3-03813-160-1
Verlag: Trans Tech Publications
Format: PDF
Kopierschutz: 0 - No protection

E-Book, Englisch, 1450 Seiten

Volume is indexed by Thomson Reuters CPCI-S (WoS).This work comprises  edited versions of papers presented at the 6th Pacific Rim International Conference on Advanced Materials and Processing (PRICM-6), held on Jeju Island, Korea between  the 5th and 9th November, 2007.

Autoren/Hrsg.

Chang, Young Won

Kim, Nack J.

Kim, Nack

Lee, Chong Soo

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

Advanced Ferrous Alloys and Processing
Sticking Mechanisms Occurring during Hot Rolling of Ferritic Stainless Steels
Sound Radiation Characteristics for Structural Damage Identification
Optimization Results of High Strength Steel Production Process
Metal Injection Molding of Nickel-Free Austenitic Stainless-Steels I-Manufacturing Process
Metal Injection Molding Method of Ni-Free Austenitic Stainless Steel II - Microstructure and Mechanical Properties
Aqueous Corrosion Characteristics of Iron Aluminides
Continuous Cooling Transformation Behavior of High Strength Low-Alloyed Cold Rolled Sheet Steel
Study of High Temperature Wear Resistance of Hot Work Steel for Magnesium Alloy Die Casting
Dry Sliding Wear Mechanisms of the High Nitrogen Austenitic 18Cr-18Mn-2Mo-0.9N Steel at Different Applied Loads
Fluid-Structure Coupled Analyses of Composite Wind Turbine Blades
Cementite Decomposition of Pearlitic Steels during Cold Drawing
The Texture Evolution of Dual Phase Steel Sheets
Effects of Finishing Rolling Temperature on the Microstructural Behavior for Fe-0.1C Steel as a Function of Niobium Content
Plastic Deformation Behavior of Micro-Alloyed Cold Forging Steel
Abnormal Grain Growth of Fe-3%Si Steel Approached by Solid-State Wetting Mechanism
Analysis on Void Closure Behavior during Hot Open Die Forging
FIB and TEM Studies on the Bainitic Microstructure in Low Carbon HSLA Steels
The Potentiality of Micro-Scaled Multi-Filament Wire Forming Using Repetitive Hydrostatic Extrusion Process
Light Metals
Mechanical Behaviors of Mg-6%Al-0.2%Mn Based Casting Alloys
Processing and Tensile Property of Nano Dispersed Al-Fe-(Mo, V, Zr) Bulk Alloy
Enhanced Formability of AZ31 Magnesium Alloy Sheet Processed by Equal Channel Angular Rolling and Annealing Treatment
The Effect of Alloying Elements on the c/a Ratio of Magnesium Binary Alloys
Forging Process Design of Al Rotating Arm Holder by FE Analysis
Effects of Heat Treatments on Microstructure of AM50 Magnesium Alloy
Homogeneity of Grain Refinement of Aluminum Alloy with Compressive Torsion Processing
Effect of Alloying Elements on Mechanical Properties for A356 Casting Alloy
Research and Development of Mg-Al-Sr Alloys
Preparation of Mg-Sr Alloy Using Electrochemical Reduction
Relationship between Tensile Deformation and Crystallographic Orientation of Grains in the Balanced Al-Mg2 Si Alloys
Relationship between Tensile Deformation and Crystallographic Orientation of Grains in Al-Mg-Si Alloys with Cu
Influence of Compressive Torsion Processing Temperature on Microstructure Refinement and Property of Aluminum Alloy
Heat Resistance of Mg-Nd Based Casting Alloys Containing Gadolinium and Yttrium
Effect of Ca and Sr Content on Elevated Temperatures Mechanical Properties of a Cast AZ91 Magnesium Alloy
Mechanical Properties of Twin Roll Cast AZ91 Magnesium Alloy at Room Temperature
Influence of Initial Texture on Twin Formation and Plastic Deformation of Rolled AZ31 Mg Alloy
Microstructure and Dynamic Ultra-Micro Hardness of the As-Cast and Extruded Mg-Al-Ca-Sm Alloys
HRTEM Observation of the Age Hardening Precipitates in Mg-Zn Alloy
Continuous Rheological Forming of A6061 Wrought Aluminum Alloy by Using Helical Shape Stirrer and its Thixoforging Process
Effect of Heat Treatment on Microstructures and Properties of Mg-9Gd-4Y-0.3Zr Alloy
Titanium Hydriding and Consolidation for Recycling of Titanium Tuning Chip
Intermetallics and High Temperature Alloys
Influence of Microstructure Change on the Superplastic Properties of Ti3Al Base Alloy
Thermodynamic Analysis of Nb-Cr Powders of Mechanical Alloying
Attempt to Control Spatial Distribution of Nano-Gold Particles Using Nanoporous Surfaces of FeAl Single Crystal
Effect of Heat Treatment Conditions on Microstructure and Fracture Toughness of a Cast Ti-Al Alloy
Interfacial Characteristics of Iron Aluminides Intermetallic Layers on Al-Coated Steel Sheet
Crystal Structure and Thermoelectric Properties of ReSi1.75 Based Alloys
Effect of Texture on Deformation Behavior of AZ31 Mg Alloy
First Principles Calculations of Thermodynamic Quantities and Phase Diagrams of High Temperature BCC Ta-W and Mo-Ta Alloys
Mechanical Properties According to Heat Treatment for Gas Turbine Blade Material
Effect of Creep Deformation on the Crystallographic Orientation Distribution in Ni Base Superalloy
Effect of Applied External Stress on Hydrogen Desorption from Metal Hydrides
Elastic Properties of L10-Ordered Single Crystals
Microstructure Evolution during Lithiation and Delithiation of Ni3Sn2 Anode for Lithium Secondary Batteries
Crystal Structure Variation of Ru2Si3 Upon Alloying with Mn
Creep Deformation and Microstructure of Alloy 617 Foil at High Temperature
Advanced Ceramics
Fabrication of Textured SrBi2Nb2O9 Ceramics by Templated Grain Growth
Study on the Properties of Doped La in BaBi4Ti4O15 Ceramic
Characterization of Bismuth Titanate Powders
In Situ Synthesis of TiB2-TiCx Ceramic Matrix Composites by Hot Isostatic Pressing
Preparations and Characterizations of Perovskite PMN Ceramics by Using a One-Step Calcination Method
Corrosion Behavior of Si3N4 Ceramics under High-Temperature and High-Pressure Water Condition
Electromechanical Properties of NKN-5LT Multilayer Actuator
H2/CO2 Gas Separation Characteristic of Zeolite Membrane at High Temperature
Hydrogen Separation Characteristics of SiC Nanoporous Membrane at High Temperature
Electrochemical Properties of Cathode for Solid Oxide Fuel Cell with Gd-Doped Ceria Electrolyte
Fabrication of Porous Alumina Ceramics by Spark Plasma Sintering Method
Composite Materials
Dynamic Thermo-Mechanical Properties of Chemically Surface Modified MWCNTs Reinforced Polymeric Composites
Fabrication of Carbon Nanotubes Reinforced Polyethylene Fibers by Melt Spinning: Process Optimization and Mechanical Strength Characterization
Interfacial Characteristics and Wear Resistance of WCp/White-Cast-Iron Composites
Spectral Element Modeling for Elastic Two-Layer Beams
Properties of CB/Rubber Composites Filled by Carbon Black Used as Catalysts for Hydrocarbon Decomposition
Electromagnetic Interference Shielding Properties of Carbon Nanotubes Reinforced Composites
A Study on Fatigue Properties of a TiNi/Al Shape Memory Alloy
Microstructure and Superconductive Property of the Extruded MgB2/Al Composite Materials
Numerical Simulations for Uniaxial Ratcheting of SiCP/6061Al Composites Concerning Particulate Arrangement
Fabrication of Oxide Ceramics Composite by Reactive Infiltration Process
Effect of Powder Blending Ratio on Synthesis of TiB2 Particles by Al-Ti-B Combustion Reaction
Development of Hybrid FRP-Concrete Composite Compression Members
Effect of Phosphorus Doping into the Silicon as an Anode Material for Lithium Secondary Batteries
A Study on the Design Curves for Pultruded Composite Columns
Structural Behavior of Polymer Mortar GFRP Composite Pipe
Physical Characteristic of Ready Mixed Concrete with Different Replacement Ratio of Recycled Aggregate
Evaluation of the Influence of Additives on the Mechanical Properties and Photo-Stability of Glass Fiber Reinforced Epoxy Pipes Using Central Composite Design
Advanced Forming and Processing
Microstructure, Hardness, and Wear Resistance of Powder-Injection-Molded Products of Fe-Based Metamorphic Powders
Fabrication of Sandwich Structure with Superplastic Forming Process from Diffusion Bonded Ti-6Al-4V Sheets
Preparation and Characterization of Tungsten Heavy Alloy Feedstock for Metal Injection Molding
The Effect of Isothermal Forging Process Parameters on the Microstructure and the Properties of TA15 Near a Titanium Alloy
Temperature Dependent Microstructure and Mechanical Behavior in AZ31 Alloy Processed by an Asymmetric Rolling
Research on Horizontal Electromagnetic Continuous Casting of Sn-P Bronze Strips
Effects of Temperature and Strain Rate on Compressive Mechanical Properties of Ultrafine-Grained CP Titanium
Recrystallization Characteristics of Ti-50.9at%Ni Alloy Processed by Equal Channel Angular Extrusion
Experimental Study of Springback in Draw Bend Test of AZ31B Magnesium Alloy Sheet
Texture and Formability of Frictionally Rolled AA 1050 Aluminum Alloy Sheets
The Study of Residual Stresses for Roller Hemmed Aluminum Alloys
Formability and Mechanical Property of Aluminum Sheets Locally Surface-Modified by the Concept of Surface Friction Joining
Evolution of Microstructure and Texture of Pure Al Single Crystal Having {112} Orientation during Severe Plastic Deformation
Characterization of Mg-Al Sheet Clad Materials Fabricated by Hot Rolling
Mechanical Properties of Ultra-Fine Grained Fe-Cr-Ni Alloy Fabricated by ARB
Extrudability and Bonding Strength of Copper Clad Aluminum Alloy Composites Produced by Indirect Extrusion Process
Effects of Microstructure on Mechanical Properties of HRS Processed SUS316L Stainless Steel
Analysis of Surface Roughness of Immersion Sn Plating Film via Micro Etch Process
Ring-Rolling Process for Manufacturing Ti-6Al-4V Plane and Profiled Ring-Products
Dynamic Recrystallization during Hot Extrusion in Mg-3Al-0.1Y Alloy
Warm Forging Characteristics of AZ31 Alloy
Low-Pressure Preheating Combustion Synthesis of Silicon Nitride
Improved Density Distribution in Powder Metallurgy Parts with Filtering Methods
Dynamic Recrystallization during Hot Extrusion in AZ31 and AZ80 Alloys
Study on Automated Scrap-Sorting by an Image Processing Technology
Microwave Assisted Esterification of Waste Cotton Fabrics for Biodegradation Films Preparation
Influence of Annealing Atmosphere on the Mechanical and Wear Properties of Free-Cutting Phosphor Bronze Alloy
Grain Refinement of Mg-Y-Zn Alloy by Friction Stir Processing
Mechanical Milling of Prealloyed Cu-Cr Powders Prepared by Gas Atomization
Advanced Melt Processing, Casting and Joining
An Activity Model of N and V in Fe-C-V-N Molten Metal
Optimization of Laser-Arc Interspacing Distance during CO2 Laser-GMA Hybrid Welding by Using High-Speed Imaging
Mechanical Properties and Microstructure of Strip Casted Ag-27%Cu-25%Zn-3%Sn Brazing Alloy
Micro-Structural Evolution of AlCu5MnCdVA Cast Aluminum Alloy by Semi-Solid Isothermal Annealing Process
A Study of Electroslag Welding Process for Special Welding Joint with Thick Plate
Sintering Mechanism of Composite Ag Nanoparticles and its Application to Bonding Process-Effects of Ag2CO3 Contents on Bondability to Cu-
Studies for the Influences of Welding Parameters of GMA Welded 600MPa Grade TRIP Steel
Effects of the Process Parameters on Beads by Plasma Arc Welding of the Membrane for LNG Ships
The Effect of Post Weld Heat Treatment on Mechanical Properties of Friction-Welded Alloy 718 and SNCRW Stainless Steel
Characteristics of SnOx-ZnO Composite Film on Poly Ethylene Terephalate (PET) Substrate Prepared by ECR-MOCVD
Thermodynamic Calculation of Alpha-Case Formation in Titanium Alloys
Functions and Morphology of Metal Lead Addition to Ancient Chinese Bronzes
In Situ Combustion Synthesis of Ti-Al Intermetallic Compounds in Al Alloy Casting Process
Permanent Mold Casting Practice and Microstructure and Mechanical Properties of Thin-Sectioned ADI Casting
Effect of Additive Powder on Microstructural Evolution in the Wide-Gap Brazed Region by In Situ High Temperature ESEM
A Study on the Welding Characteristics of Dissimilar Metal Using a High Power CW Nd:YAG Laser
Rheocast of Al-Si-Mg Alloy Containing 1Mass% Iron
Improvement of the Accuracy of High Temperature Slab Weight in Continuous Casting
Surface Roughness of Cu-Be Alloy (C17200) Rod Alloy Produced by Horizontal Type Continuous Casting Process
Effects of Electric Pulse on Solidification Structure of KS282 Alloy
Fatigue Crack Characteristics of Friction Stir Welded Aluminum Alloy Joints
Alignment of Primary Phase of a Binary Alloy during Solidification
Magnetic, Electronic and Optical Materials
Microstructure and Properties of Cu-3.2Ni-0.75Si-0.3Zn Alloy for Lead Frame
Preparation of CaAl2O4: Eu2+ Long Persistent Blue Phosphor
Large Isothermal Magnetic Entropy Change after Hydrogen Absorption into La0.5Pr0.5(Fe0.88Si0.12)13
Exchange Bias Field Change of FeMn-NiFe Films by He Ion Irradiation Using DuoPIGatron Source
Electrodeposited Nickel Nanowire Arrey
Effect of Continuous Casting Parameters on Microstructure and Texture of Gold Bonding Wire for Semiconductor Packaging
Fabrication of Ta-Al-N Thin Films and its Cu Diffusion on Barrier Properties
Synthesis and Growth Mechanism of ZnO Nanoneedles Using Thermal Oxidation Upon a Plated Zn Nanocrystalline Layer
Solventless Synthesis of Bi2S3 Nanowires and their Application to Solar Cells
The Improvement of Permeability and Strength in Soft Magnetic Composites Motor Core Using Spark Plasma Sintering Process
Thin Film Materials and Processing
Nanocrystalline Diamond Film Produced by Argon Addition in the CH4-H2 Microwave CVD Plasmas
Improving the Properties of Sapphire by Coatings
Directed Crystallization of Amorphous Silicon Deposits on Glass Substrates
Recovery of Structural and Luminescent Properties in Zinc-Implanted ZnO Films
Visible-Light Photodegradation of Rhodamine B on Carbon Doped Titanium Oxide Thin Film Prepared by Atmospheric MOCVD
Effect of Plating Condition on the Mechanical Properties and Residual Stress of Electroplated Copper Film
Characterization of (Ti, Al) N Films Synthesized by Arc Ion Plating
Low-Temperature Deposition of Amorphous Carbon Films for Surface Passivation of Carbon-Doped Silicon Oxide
Preparation and Characterization of Doped Nanometer TiO2
Effect of Residual Stress on P Doped Nano-Crystalline Silicon Deposited by HWCVD Films
MOCVD Growth of SiC Nanowires Aiming at the Control of their Shape
Fabrication of OTFT Array with Coated Thin Film Dielectric and Printed Electrodes by Using Microcontact Printing
Amorphous and Quasicrystalline Materials, Nanocrystalline Materials
Synthesis and Characterization of Y3Al5O12 Nanocrystals
Preparation of Nano-Particles of Metal Oxides via a Novel Solid-Liquid Mechanochemical Reaction Technology
Crystal Growth in Amorphous Binary Alloys of Zr-Ni System
Effect of Magnetic Field on Crystallization of Fe-Based Metallic Glass
Microstructure and Optical Properties of Fe-Doped SnO2 Nanoparticles Synthesized by Hydrothermal Method
Structural Defects and Changes in Al-Pd-Fe Crystalline Approximant
Fabrication of Homogeneous Bulk Nanocrystalline Ni-W Alloys by an Electroforming Process
Bulk Mechanical Alloying of Al/Fe Multilayer by Accumulative Roll-Bonding Process
Structural and Mechanical Behaviors of Partially Devitrified Ti-Based Bulk Metallic Glass
Synthesis Behavior of La0.7Ca0.3MnO3 by Hydrothermal Method
Melting Liquid Joint Method of Ti(Cu)-Base Bulk Metallic Glassy Alloy
Y-Shaped Carbon Nanowires Obtained from Ethanol Flames and their Growth Mechanism
Comparison between Tribological Characteristics of Al-Cu-Fe-B Quasicrystalline and Mo Coatings
Upsetting of Ultrafine-Grained Bulk Al-Mg Alloy Consolidated by Hydrostatic Extrusion
Glass Transition within the Cluster Variation Approximation
Carbon Nanotubes Obtained by ECC Technique with Cobalt Salt as Catalyst Precursor
Synthesis of Carbon Nanofibers by Ethanol Catalytic Combustion Technique
The Influence of Catalyst Nature on the Morphology of Multi-Directionally Grown Carbon Nanofibers
Synthesis of Zr-Based Glassy Alloy Foams
Magnetic and Mechanical Properties of Fe-Co-B-Si-Nb-M (M = Al, V, Mo,) Bulk Metallic Glasses
Fine Crystalline Phase Dispersion in Zr-Based Bulk Metallic Glass by Laser Irradiation
Biomaterials, Smart Materials and Structures
High-Field Maxwell Stress Effect of Dielectric Actuator Based on Segmented Polyurethane
Topology Optimization of Three-Dimensional Biodegradable Polymer Multi-Layer Microstructure for Implantable Drug Controlled Release
Evaluation of BAp Orientation Using Mouse Models for Osteoporosis (OPG-KO) and Osteopetrosis (op/op)
Biofunctionalization of Metal Surface by Immobilization of Poly(Ethylene Glycol) Terminated Amine
Microstructure and Mechanical Properties of Hot-Pressed Co-Cr-Mo Alloy Compacts
Effect of Co-Doping Cation on Phase Stability of Zirconia Bioceramics in Hot Water
Effect of Sigma Phase in Co-29Cr-6Mo Alloy on Corrosion and Mechanical Properties
Effect of Second Phase Particles on Phase Stability of Zirconia in Hot Water
Effects of Additional Elements on Structure, Mechanical Strength and Chemical Properties of Ni-Free Ti-Based Bulk Metallic Glasses for Biomaterials
Effect of Thermo-Mechanical Processing on Texture and Elastic Modulus of Ti-Nb-Si Alloys for Biomedical Application
Configuration Optimization of Truss Structures Using Harmony Search Heuristic Algorithm
Hydroxyapatite Formation and Protein Absorption on Triethyl Phosphate Modified Titanium Surface
Preparation of Silicon-Containing Apatite Coating on Titanium
Ball-Like Carbon Deposits Synthesized by Catalytic Combustion
Raman Spectroscopic Characterization for Carbon Nanofibers Produced by Using Ferric Chloride of Different Concentration as Catalyst Precursor
Electrochemical Properties of TiN and ZrN Coated Ti-Hf Alloy
AC Impedance Behaviors of Ti-Zr Binary Alloys for Biomaterials
Electrochemical Characteristics of Osteoblast Cultured Ti-Ta Alloy for Dental Implant
Effects of Multi-Layered TiN/ZrN/Tooth-Ash Composite Coatings on the Surface Characteristics of Ti-(Nb, Zr, Ta, Hf) Dental Implant Alloys with Low Elastic Modulus
Fuel Cells and Hydrogen Storage Materials
Study on Electrochemical Hydrogen Storage of Multi-Walled Carbon Nanotubes
Nano Composite Membranes of Sulfonated Poly(2,6-Dimethyl-1,4-Phenylene Oxide)/Poly(2,6-Diphenyl-1,4-Phenylene Oxide) Copolymer and SiO2 for Fuel Cell Application
Progress on the Composite Membranes for PEM Fuel Cells
Investigation of PTFE-Reinforced Integral Multi-Layered Self-Humidifying Membranes for PEM Fuel Cells Application
Increase of Electrolysis Cell Performance by Addition of PVDF and Graphite Powder on MEA for Regenerative Fuel Cells
Improvement of Electrical and Thermal Properties of Epoxy Based Graphite Bipolar Plate for PEMFC
Hydrogen Storage Properties of Mg-Al Alloy Prepared by Super Lamination Technique
Surface Fractals and Wetting Properties of Porous Anodes Strengthened by Ni3Al for Molten Carbonate Fuel Cell
Effect of Ni Coating on Hydrogenation Kinetics in Pure Mg and Mg-Mg2Ni Eutectic Alloy
Synthesis and Decomposition of Pure Ca(AlH4)2
Hydrogen Solubility and Resistance to Hydrogen Embrittlement of Nb-Pd Based Alloys for Hydrogen Permeable Membrane
Development of Environmental Cell for Gas Reaction of Nano-Size Particles
Application of Open Celled Al in the Alloy Hydride System for Hydrogen Storage
High-Pressure Synthesis of Novel Hydride in Ca-TM Systems
Ecomaterials and Porous Materials
Electronic Transport Properties of Tin-Filled Cobalt Antimonides
Application of Porous Concrete to a Structural Foundation in Soft Ground
Nb-NbN Cermet Film as Solar Selective Coating
Fabrication of Magnesium Foam by Precursor Method Using Machined Chips
Fabrication of Long Scale Aluminum Foam by Transfer Heat Foaming of Precursor
Optimization of Heat Treatment Parameters of Mo-Free High-Cr Cast Iron Mill Balls
Energetic Particles-Materials Interactions and Nuclear Materials
Combustion Synthesis in Mn-Si-C-N Using Mn as a Surrogate for Am
Fabrication of Monolithic UAl2 Pellet for High-Density Nuclear Fuel
Microstructural Evolution in Cerium Dioxide Irradiated with Heavy Ions at High Temperature
First-Principles Study of Structural and Electronic Property of Pyrochlore Dy2Sn2O7
Material Property of a Passive Oxide Formed on Alloy 600
Modeling and Simulation of Materials and Processes
Modeling and Simulation of Driveline Test Bench for Automotive Chassis Component System
Numerical Simulation of Unidirectional Solidification Process of Turbine Blade Castings
Effect of Orifice Shape in Contour Crafting with Ceramic Material: A Simulation for Extrusion and Deposition Mechanism
A New Growth Kinetics in Simulation of Dendrite Growth by Cellular Automaton Method
Numerical Simulation on Stress Fields of Lasers Braze Fusion Welding
Electronic State Calculation of Manganese Dioxide and Manganese-Molybdenum Oxide for Dimensionally Stable Anode
Solidification Behavior of AZ31 Magnesium Alloy Plate during HCC with Constant Velocity
Optimization of Preform in Forging Process Using Kriging Model
Springback Compensation Based on Finite Element for Multi-Point Forming in Shipbuilding
Application of RBF Network for Forecasting Characteristics of In-Flight Particles by Plasma Spraying
Thermodynamic Analysis of the Ti-Zr-H Ternary Phase Diagram
Numerical Simulation and Experimental Research on Rolling Process of Conical Ring with Inner Steps
Friction Stir Weld Modeling of Aluminum Alloys
Effect of Grain Boundary Characteristics on Lattice Orientations
The Injection Molding Simulation of Lever Cam Ass’y Using High-Functional Polymer
Hot Tearing Prediction of Aluminum Alloy in the Casting Process
Real-Time Simulation Measurement System for Transient Temperature of Impacting Droplet Based on the Virtual Instrument
Recovery of Magnesium Oxide and Magnesium Hydroxide from the Waste Bittren
Numerical Analysis on Flow Stress of AZ61B Magnesium Alloy during Hot Compression Simulation Testing
Structure Stability and Electronic Structure of Semiconducting Rhenium Silicide with Doping
Characterization of Dynamic Globularization Behavior during Hot Working of Ti-6Al-4V Alloy
Prediction of Mechanical Properties and Microstructure Distributio